这些小活动你都参加了吗?快来围观一下吧!>>
电子产品世界 » 论坛首页 » DIY与开源设计 » 电子DIY » [紧急]钢板的选择一定要慎重

共3条 1/1 1 跳转至

[紧急]钢板的选择一定要慎重

专家
2015-08-29 08:39:41     打赏

昨天有看到风语者在问3脚轴要不要加钢板的问题,在做了回复之后实然想到钢板选择也是个重要问题啊,因为我此次项目的供应商提供的轴是3脚轴,而根据论坛里的巨巨们的经验,3脚轴是要一定要加钢板的。然后本人在论坛里搜寻一下,没有钢板的介绍,故在这里班门弄斧,借花献佛,给大家做个简要说明,以使大家少走弯路。

Layouts and plates


  • Bottom row - 1.5x (4) and 1x (2) modifier size with 7x spacebar, or all 1.25x (7) modifier size with 6.25x spacebar. Some non-standard spacing or hybrids are also possible
  • Enter - standard 2.25x size or split up to 1.25x + 1x for ANSI, or the ISO-Enter that spans 2 rows
  • Capslock - centered or off-centered stem, standard 1.75x size
  • L-shift – standard 2.25x size (ANSI) or 1.25x + 1x (ISO).
  • R-shift – standard 2.75x size (poker), or 1.75x + 1x (Pure)
  • Backspace – standard 2x, or split up to two 1x
  • 10x spacebar - all 1.5x plates has optional mounts for 10x size spacebars.

Here are some possible layouts, rendered with my case design and toxic green caps theme:


ANSI 1.25x - Poker





ANSI 1.25x with short R-Shift - Pure





ANSI 1.5x - full 1.5x mod, WKL, or HHKB






ANSI 1.5x with short R-shift - full 1.5x mod, WKL, or "true" HHKB







ANSI 1.5x with short R-shift and split backspace - full 1.5x mod, WKL, or "true" HHKB





ISO 1.25x




ISO 1.5x - full 1.5x mod, WKL, or HHKB





ISO 1.5x with short R-shift - full 1.5x mod, WKL, or HHKB







IvanIvanovich (CANCELED)




Samwisekoi





GH60 (max keys)






Each of the layouts above will have their own plates (except WKL and HHKB, these just use any 1.5x plate), compatible with all 3 types of stabilizers. In addition, there will be 2 more “universal” plates available. These plates’ main feature is the support for any possible hybrid layout from above. You’ll also be able to completely change layout using the same plate, by desoldering only a few switches and shifting them over (or adding/subtracting switches) rather than desoldering all switches and installing a new plate. You’ll still be able to open up switch top covers like all the other plates. The drawback is that you must use PCB-mounted cherry stabilizers, no other stabilizers option. And although plate-mounted cherry switches should be sufficient, it’s recommended you use PCB-mounted switches for the ones that go in the larger cutout holes.


Universal ANSI


Universal ISO


Universal 10x spacebar (special order)



此文的原始链接为:https://geekhack.org/index.php?topic=41464.0 因源于网络,故不设置积分下载,亦不设置回复可见,只愿大家分享经验,不要据为己有。




关键词: 紧急     钢板     键盘DIY     kbdiy    

专家
2015-08-29 08:55:56     打赏
2楼
鉴于论坛帖子插入图片的困难(也许是我不会弄),就做了word文档,给大家下载,当然不下也可以,直接去原文链接查看就可。[紧急]钢板的选择一定要慎重.rar

专家
2015-08-29 09:03:44     打赏
3楼
由于钢板对3脚轴来说,起到了限位与固定的作用,是推荐一定要用的。但是钢板一旦做成其键盘布局也就固定了,失去了灵活性。所以说使用3脚轴时,PCB板、钢板和布局是三位一体的,必须统一考虑,也因此才说,此次胳肢窝的diy活动中,钢板选择也要慎重啊。话说此次的PCB板能支持的布局有哪些呢?我的布局能适用吗?赶紧研究研究

共3条 1/1 1 跳转至

回复

匿名不能发帖!请先 [ 登陆 注册 ]