EEPW论坛

/**
  ******************************************************************************
  * @file    EXTI/EXTI_Config/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32_eval.h"
//#include "delay.h"
#include <stdio.h>
#define VREF 3.3
/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup EXTI_Config
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
GPIO_InitTypeDef   GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
USART_ClockInitTypeDef USART_ClockInitStructure;

void RCC_Configuration(void)
{
	SystemInit();
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
	GPIO_ResetBits(GPIOD,GPIO_Pin_2);
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
	GPIO_SetBits(GPIOC,GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7);
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
} 

void delay_us(u32 n)   
{   
    u8 j;   
    while(n--)   
    for(j=0;j<10;j++);   
}   

void  delay_ms(u32 n)   
{   
    while(n--)   
    delay_us(1000);   
}

void USART_int(long BaudRate)
{
	  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_USART1,ENABLE);
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
    GPIO_Init(GPIOA, &GPIO_InitStructure);
    /* PA10 USART1_Rx  */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_Init(GPIOA, &GPIO_InitStructure);
    /* USARTx configured as follow:
        - BaudRate = 115200 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
  */
  USART_InitStructure.USART_BaudRate = BaudRate;//??????
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;//???????8bit
  USART_InitStructure.USART_StopBits = USART_StopBits_1;//????1
  USART_InitStructure.USART_Parity = USART_Parity_No;//????
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//??????none
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;//??????????
	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;     
  USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;      
  USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;      
  USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
  USART_ClockInit(USART1, &USART_ClockInitStructure);
  USART_Init(USART1, &USART_InitStructure);
  USART_Cmd(USART1, ENABLE);
	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
  USART_Cmd(USART1, ENABLE);
}


void PWM_Config()
{ uint16_t PrescalerValue = 0;
	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
  TIM_OCInitTypeDef  TIM_OCInitStructure;
	/* TIM2 clock enable */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
  /* GPIOA  enable */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO  , ENABLE);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
	TIM_Cmd(TIM2, ENABLE);
	  /* Compute the prescaler value */
  PrescalerValue = (uint16_t) (SystemCoreClock / 24000000) - 1;
  /* Time base configuration */
  TIM_TimeBaseStructure.TIM_Period = 0x07FF;
  TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;//脉冲宽度调制模式1
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
  /* PWM1 Mode configuration: Channel2 */
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;
  TIM_OC2Init(TIM2, &TIM_OCInitStructure);
	/* PWM1 Mode configuration: Channel3 */
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;
  TIM_OC3Init(TIM2, &TIM_OCInitStructure);
	/* PWM1 Mode configuration: Channel4 */
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;
  TIM_OC4Init(TIM2, &TIM_OCInitStructure);
  TIM_ARRPreloadConfig(TIM2, ENABLE);
}

void PWM_TEST()
{ unsigned int temp0=0,temp1=0,temp2=0,i=0;
	printf("PWM-RGB TEST......\r\n");
  
	for(;i<200;i++)//黄
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=2310,temp1=790,temp2=140;
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)//深蓝
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=60,temp1=2380,temp2=2380;	
  }	
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)//
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=2280,temp1=1600,temp2=3200;	
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=2330,temp1=120,temp2=2000;
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=1040,temp1=40,temp2=1020;
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=0,temp1=640,temp2=0;
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
	for(;i<200;i++)
		{
		  TIM_SetCompare2(TIM2, temp0);
			TIM_SetCompare3(TIM2, temp1);
			TIM_SetCompare4(TIM2, temp2);
			temp0=47,temp1=1000,temp2=2400;
  }
	delay_ms(500);
	temp0=0,temp1=0,temp2=0,i=0;
}


/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
		
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  /* System Clocks Configuration */
  RCC_Configuration();
  USART_int(115200);
	
	printf(" config done...\r\n");
	PWM_Config();
	delay_ms(1000);
	while(1)
	{
		PWM_TEST();
	}
}



#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
  


/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(EVAL_COM1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
  {}

  return ch;
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

我想问问

test函数里面i是用来干嘛的？

#include "stm32f10x.h"
#include "stm32_eval.h"
//#include "delay.h"
#include <stdio.h>
volatile int flag;
#define Set_B20()	 GPIO_SetBits(GPIOC, GPIO_Pin_12)
#define Reset_B20()	 GPIO_ResetBits(GPIOC, GPIO_Pin_12)
#define Read_B20()	 GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_12)
unsigned char Error_Flag=0;
unsigned char zf=0;
unsigned char ID[8];
void SysTick_Configuration(void)
{
  /* Setup SysTick Timer for 10 msec interrupts  */
  if (SysTick_Config(48000))                //SysTick配置
  { 
    /* Capture error */ 
    while (1);
  }  
 /* Configure the SysTick handler priority */
  NVIC_SetPriority(SysTick_IRQn, 0x0);                       //SysTick中断优先级
}


/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup EXTI_Config
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
GPIO_InitTypeDef   GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
USART_ClockInitTypeDef USART_ClockInitStructure;

void RCC_Configuration(void)  
{  
  RCC_DeInit(); 		//将外设RCC寄存器重设为缺省值
  RCC_HSICmd(ENABLE);			//使能内部高速晶振HSI  
  while(RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);  
    
  RCC_SYSCLKConfig(RCC_SYSCLKSource_HSI);   
    
  RCC_HSEConfig(RCC_HSE_OFF);    //关闭外部高速晶振
  RCC_LSEConfig(RCC_LSE_OFF);    //关闭外部低速晶振
  RCC_PLLConfig(RCC_PLLSource_HSI_Div2,RCC_PLLMul_6);     // 8*6=48M赫兹  
  RCC_PLLCmd(ENABLE);            //使能
  while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET); 		//检查指定的RCC标志位(PLL准备好标志位)设置与否
  RCC_ADCCLKConfig(RCC_PCLK2_Div4);  
  RCC_PCLK2Config(RCC_HCLK_Div1);  
  RCC_PCLK1Config(RCC_HCLK_Div2);  
  RCC_HCLKConfig(RCC_SYSCLK_Div1);  
  RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);  
  while(RCC_GetSYSCLKSource() != 0x08);    // 	0x08:PLL作为系统时钟
//  SystemInit();  
      
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOD, &GPIO_InitStructure);  
    GPIO_ResetBits(GPIOD,GPIO_Pin_2);  
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOC, &GPIO_InitStructure);  
    GPIO_SetBits(GPIOC,GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7);  
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);  
}
void USART_int(long BaudRate)
{
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_USART1,ENABLE);
       GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
    GPIO_Init(GPIOA, &GPIO_InitStructure);
    /* PA10 USART1_Rx  */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_Init(GPIOA, &GPIO_InitStructure);
  /* USARTx configured as follow:
        - BaudRate = 115200 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
  */
  USART_InitStructure.USART_BaudRate = BaudRate;//??????
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;//???????8bit
  USART_InitStructure.USART_StopBits = USART_StopBits_1;//????1
  USART_InitStructure.USART_Parity = USART_Parity_No;//????
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//??????none
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;//??????????
	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;     
    USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;      
    USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;      
    USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
    USART_ClockInit(USART1, &USART_ClockInitStructure);
  USART_Init(USART1, &USART_InitStructure);
  USART_Cmd(USART1, ENABLE);
	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
 USART_Cmd(USART1, ENABLE);
}
/*延时函数*/
void delay_18b20(u32 nus)
{
	u16 i;
	while(nus--)
		for(i=12;i>0;i--);
}

void delay_us(u32 n)   
{   
    u8 j;   
    while(n--)   
    for(j=0;j<10;j++);   
}   

void  delay_ms(u32 n)   
{   
    while(n--)   
    delay_us(1000);   
}
	
void Init18B20(void)//18B20 初始化
{
   u8 aa=0;
   u8 count =0;
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);//使能
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
   Set_B20() ;  //置高电平
   delay_18b20(1);
   Reset_B20();//置低电平

   delay_18b20(480);
   Set_B20();
//	delay_18b20(500);
   delay_18b20(480);

	count=0;
	aa=Read_B20();     //读数据
    while(!aa && count<100)	 
   {
   	aa=Read_B20();
	count++;
   }
   if(count>=99)
   		Error_Flag=1;
	else
		Error_Flag=0;
   
}
  
unsigned char Read18B20(void)
{  
unsigned char i=0;
unsigned char date=0;
u8 tempp;
   for(i=8;i>0;i--)
   {

   Reset_B20();
   date>>=1;      //从高位右移1位
   delay_18b20(1);
   Set_B20();     //置高电平
    delay_18b20(1);
   tempp=Read_B20();

   if(tempp)
   		date|=0x80;   //
	delay_18b20(60);
	}
	return(date);
}
void Write18B20(unsigned char date)
{
	unsigned char i=0;

	for (i=8; i>0; i--)
	{
		Reset_B20(); 
		delay_18b20(1); 		
		if(date & 0x01)			
		{	
			Set_B20();
		}
		else
		{	Reset_B20();}
		delay_18b20(60);
		date>>=1; 	 
		 Set_B20();
		 delay_18b20(1);
			
	}
	delay_18b20(15);
}

 float Read_T()		//读温度
{	
		unsigned char TUp,TDown;
	unsigned char fTemp;
	u8 TT=0;

	 float Temp = 0;
	Init18B20();
	Write18B20(0xcc); 	  
	Write18B20(0x44); 	 
	Init18B20();
	Write18B20(0xcc); 	
	Write18B20(0xbe); 	
	TDown = Read18B20();   	
	TUp = Read18B20();   	
	
	if(TUp>0x7f)      
	{
		TDown=~TDown;  
		TUp=~TUp+1; 
		TUp/=8;		     
		zf=1;         
 	}
	else
		zf=0;	  

	fTemp=TDown&0x0f;		
	TUp<<=4;
	TDown>>=4;
	TT=TUp|TDown;
	Temp=TT+(float)fTemp/16;		
	return(Temp);
}
                                 
int main(void)
{
		
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  /* System Clocks Configuration */
	int i=0;
  RCC_Configuration();
  USART_int(115200);
	SysTick_Configuration();
	Init18B20();     			//18B20初始化
	Write18B20(0x33);     //
  for(;i<8;i++)  
  {  
        ID[i]=Read18B20();   //读取18b20的地址放到数组中 
  }  
	printf(" config done...\r\n");
	delay_ms(1000);
	while(1)
	{  flag++;
		if(flag==300)   //每300ms读一次序列号
		{ 
			printf("The ID is:\n");
			 for(;i<8;i++)  
        {  
            printf("%x",ID[i]);  
        } 
     printf("\n");				
    }
		
		if(flag == 500){     //每500 ms读一次温度
			printf("The Temperature is:%f\r\n",Read_T());//输出温度
			printf("\r\n");
			flag=0;
}
	}
}



#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
  


/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(EVAL_COM1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
  {}

  return ch;
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

#include "stm32f10x.h"
#include "stm32_eval.h"
//#include "delay.h"
#include <stdio.h>
#define VREF 3.3
/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup EXTI_Config
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
GPIO_InitTypeDef   GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
USART_ClockInitTypeDef USART_ClockInitStructure;

void RCC_Configuration(void)
{
	SystemInit();
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
 GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);
 GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
	GPIO_ResetBits(GPIOD,GPIO_Pin_2);
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);
 GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
	GPIO_SetBits(GPIOC,GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7);
	  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
} 

void USART_int(long BaudRate)
{
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_USART1,ENABLE);
       GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
    GPIO_Init(GPIOA, &GPIO_InitStructure);
    /* PA10 USART1_Rx  */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_Init(GPIOA, &GPIO_InitStructure);
  /* USARTx configured as follow:
        - BaudRate = 115200 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
  */
  USART_InitStructure.USART_BaudRate = BaudRate;//??????
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;//???????8bit
  USART_InitStructure.USART_StopBits = USART_StopBits_1;//????1
  USART_InitStructure.USART_Parity = USART_Parity_No;//????
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//??????none
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;//??????????
	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;     
    USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;      
    USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;      
    USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
    USART_ClockInit(USART1, &USART_ClockInitStructure);
  USART_Init(USART1, &USART_InitStructure);
  USART_Cmd(USART1, ENABLE);
	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
  USART_Cmd(USART1, ENABLE);
}
void delay_us(u32 n)//?óê±oˉêyμ?éù?÷ 1us   
{  
    u8 j;  
    while(n--)  
    for(j=0;j<10;j++);  
}  	
void delay_ms(u32 n)
{  
  while(n--)  
    delay_us(1000);
}

void PWM_Config()  
{ uint16_t PrescalerValue = 0;  
    TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;  
  TIM_OCInitTypeDef  TIM_OCInitStructure;  
    /* TIM2 clock enable */  
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);  
  /* GPIOA  enable */  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO  , ENABLE);  
      
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_Init(GPIOA, &GPIO_InitStructure);  
    TIM_Cmd(TIM2, ENABLE);  
      /* Compute the prescaler value */  
  PrescalerValue = (uint16_t) (SystemCoreClock / 24000000) - 1;  
  /* Time base configuration */  
  TIM_TimeBaseStructure.TIM_Period = 0x07FF;  
  TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;  
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;  
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);  
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;//????????1  
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;  
  /* PWM1 Mode configuration: Channel2 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC2Init(TIM2, &TIM_OCInitStructure);  
    /* PWM1 Mode configuration: Channel3 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC3Init(TIM2, &TIM_OCInitStructure);  
    /* PWM1 Mode configuration: Channel4 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC4Init(TIM2, &TIM_OCInitStructure);  
  TIM_ARRPreloadConfig(TIM2, ENABLE);  
} 

void ADC_CONFIG(){
	ADC_InitTypeDef ADC_InitStructure;
	#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
  /* ADCCLK = PCLK2/2 */
  RCC_ADCCLKConfig(RCC_PCLK2_Div2); 
#else
  /* ADCCLK = PCLK2/4 */
  RCC_ADCCLKConfig(RCC_PCLK2_Div4); 
#endif
ADC_DeInit(ADC1);
  /* Enable ADC1 and GPIOC clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOB, ENABLE);
	
	/* Configure PB0 (ADC Channel14) as analog input -------------------------*/
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
	
  
  /* ADC1 configuration ------------------------------------------------------*/
  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
  ADC_InitStructure.ADC_NbrOfChannel = 1;
  ADC_Init(ADC1, &ADC_InitStructure);


  /* Enable ADC1 DMA */
  ADC_DMACmd(ADC1, ENABLE);
  
  /* Enable ADC1 */
  ADC_Cmd(ADC1, ENABLE);

}

int Get_ADC(){
	 /* ADC1 regular channel configuration */ 
  ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 1, ADC_SampleTime_55Cycles5);
	/* Enable ADC1 reset calibration register */   
  ADC_ResetCalibration(ADC1);
  /* Check the end of ADC1 reset calibration register */
  while(ADC_GetResetCalibrationStatus(ADC1));

  /* Start ADC1 calibration */
  ADC_StartCalibration(ADC1);
  /* Check the end of ADC1 calibration */
  while(ADC_GetCalibrationStatus(ADC1));
     
  /* Start ADC1 Software Conversion */ 
  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
	
	return ADC_GetConversionValue(ADC1);
}

/*void PWM_TEST()  
{ unsigned int temp0=0,temp1=0,temp2=0,i=0;  
    printf("PWM-RGB TEST......\r\n");  
    
    for(;i<200;i++)//?  
        {  
          TIM_SetCompare2(TIM2, temp0);  
            TIM_SetCompare3(TIM2, temp1);  
            TIM_SetCompare4(TIM2, temp2);  
            temp0=2310,temp1=790,temp2=140;  
  }  
    delay_ms(500); 
    
}*/


/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{float Volt=0.00;
	int ADValue = 0;
		
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  /* System Clocks Configuration */
  RCC_Configuration();
USART_int(115200);
	ADC_CONFIG();
	printf(" config done...\r\n");
	Get_ADC();
	delay_ms(1000);
	while(1)
	{ unsigned int temp0=0,temp1=0,temp2=0,i;  
    printf("PWM-RGB TEST......\r\n");  

    delay_ms(500);
    i =	ADValue;	
		ADValue = Get_ADC();
		Volt = VREF*ADValue/4095;
		printf("===============================\r\n");
		printf("The ADC value is:%d\r\n",ADValue);
		printf("The Volt is:%f V\r\n",Volt);
		        TIM_SetCompare2(TIM2, temp0);  
            TIM_SetCompare3(TIM2, temp1);  
            TIM_SetCompare4(TIM2, temp2);
     		
    if(i != ADValue ){
       temp0=ADValue-1000;
			temp1=ADValue/2-500;
			temp2=ADValue/100;
			}		
			delay_ms(500);	
	}
}


#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
  


/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(EVAL_COM1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
  {}

  return ch;
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
(12)********************************************************************************************ADC
/** 
  ****************************************************************************** 
  * @file    EXTI/EXTI_Config/main.c  
  * @author  MCD Application Team 
  * @version V3.5.0 
  * @date    08-April-2011 
  * @brief   Main program body 
  ****************************************************************************** 
  * @attention 
  * 
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS 
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE 
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY 
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING 
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE 
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. 
  * 
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2> 
  ****************************************************************************** 
  */   
  
/* Includes ------------------------------------------------------------------*/  
#include "stm32f10x.h"  
#include "stm32_eval.h"  
//#include "delay.h"  
#include <stdio.h>  
#define VREF 3.3  
/** @addtogroup STM32F10x_StdPeriph_Examples 
  * @{ 
  */  
  
/** @addtogroup EXTI_Config 
  * @{ 
  */   
  
/* Private typedef -----------------------------------------------------------*/  
/* Private define ------------------------------------------------------------*/  
/* Private macro -------------------------------------------------------------*/  
/* Private variables ---------------------------------------------------------*/  
GPIO_InitTypeDef   GPIO_InitStructure;  
USART_InitTypeDef USART_InitStructure;  
USART_ClockInitTypeDef USART_ClockInitStructure;  
  
void RCC_Configuration(void)  
{  
    SystemInit();  
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOD, &GPIO_InitStructure);  
    GPIO_ResetBits(GPIOD,GPIO_Pin_2);  
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOC, &GPIO_InitStructure);  
    GPIO_SetBits(GPIOC,GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7);  
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);  
}   
  
void delay_us(u32 n)     
{     
    u8 j;     
    while(n--)     
    for(j=0;j<10;j++);     
}     
  
void  delay_ms(u32 n)     
{     
    while(n--)     
    delay_us(1000);     
}  
  
void USART_int(long BaudRate)  
{  
      RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_USART1,ENABLE);  
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;  
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;   
    GPIO_Init(GPIOA, &GPIO_InitStructure);  
    /* PA10 USART1_Rx  */  
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;  
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;  
    GPIO_Init(GPIOA, &GPIO_InitStructure);  
    /* USARTx configured as follow: 
        - BaudRate = 115200 baud   
        - Word Length = 8 Bits 
        - One Stop Bit 
        - No parity 
        - Hardware flow control disabled (RTS and CTS signals) 
        - Receive and transmit enabled 
  */  
  USART_InitStructure.USART_BaudRate = BaudRate;//??????  
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;//???????8bit  
  USART_InitStructure.USART_StopBits = USART_StopBits_1;//????1  
  USART_InitStructure.USART_Parity = USART_Parity_No;//????  
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//??????none  
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;//??????????  
    USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;       
  USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;        
  USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;        
  USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;  
  USART_ClockInit(USART1, &USART_ClockInitStructure);  
  USART_Init(USART1, &USART_InitStructure);  
  USART_Cmd(USART1, ENABLE);  
    USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);  
  USART_Cmd(USART1, ENABLE);  
}  
  
  
void PWM_Config()  
{ uint16_t PrescalerValue = 0;  
    TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;  
  TIM_OCInitTypeDef  TIM_OCInitStructure;  
    /* TIM2 clock enable */  
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);  
  /* GPIOA  enable */  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO  , ENABLE);  
      
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_Init(GPIOA, &GPIO_InitStructure);  
    TIM_Cmd(TIM2, ENABLE);  
      /* Compute the prescaler value */  
  PrescalerValue = (uint16_t) (SystemCoreClock / 24000000) - 1;  
  /* Time base configuration */  
  TIM_TimeBaseStructure.TIM_Period = 0x07FF;  
  TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;  
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;  
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);  
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;//????????1  
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;  
  /* PWM1 Mode configuration: Channel2 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC2Init(TIM2, &TIM_OCInitStructure);  
    /* PWM1 Mode configuration: Channel3 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC3Init(TIM2, &TIM_OCInitStructure);  
    /* PWM1 Mode configuration: Channel4 */  
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;  
  TIM_OCInitStructure.TIM_Pulse = 0xFFFF;  
  TIM_OC4Init(TIM2, &TIM_OCInitStructure);  
  TIM_ARRPreloadConfig(TIM2, ENABLE);  
}   

void ADC_CONFIG(){
	ADC_InitTypeDef ADC_InitStructure;
	#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
  /* ADCCLK = PCLK2/2 */
  RCC_ADCCLKConfig(RCC_PCLK2_Div2); 
#else
  /* ADCCLK = PCLK2/4 */
  RCC_ADCCLKConfig(RCC_PCLK2_Div4); 
#endif
ADC_DeInit(ADC1);
  /* Enable ADC1 and GPIOC clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOB, ENABLE);
	
	/* Configure PB0 (ADC Channel14) as analog input -------------------------*/
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
	
  
  /* ADC1 configuration ------------------------------------------------------*/
  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
  ADC_InitStructure.ADC_NbrOfChannel = 1;
  ADC_Init(ADC1, &ADC_InitStructure);


  /* Enable ADC1 DMA */
  ADC_DMACmd(ADC1, ENABLE);
  
  /* Enable ADC1 */
  ADC_Cmd(ADC1, ENABLE);

}

int Get_ADC(){
	 /* ADC1 regular channel configuration */ 
  ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 1, ADC_SampleTime_55Cycles5);
	/* Enable ADC1 reset calibration register */   
  ADC_ResetCalibration(ADC1);
  /* Check the end of ADC1 reset calibration register */
  while(ADC_GetResetCalibrationStatus(ADC1));

  /* Start ADC1 calibration */
  ADC_StartCalibration(ADC1);
  /* Check the end of ADC1 calibration */
  while(ADC_GetCalibrationStatus(ADC1));
     
  /* Start ADC1 Software Conversion */ 
  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
	
	return ADC_GetConversionValue(ADC1);
}

/*void PWM_TEST()  
{ unsigned int temp0=0,temp1=0,temp2=0,i=0;  
    printf("PWM-RGB TEST......\r\n");  
    
    for(;i<200;i++)//?  
        {  
          TIM_SetCompare2(TIM2, temp0);  
            TIM_SetCompare3(TIM2, temp1);  
            TIM_SetCompare4(TIM2, temp2);  
            temp0=2310,temp1=790,temp2=140;  
  }  
    delay_ms(500); 
    
}*/


/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{float Volt=0.00;
	int ADValue = 0;
		 unsigned int temp0=0,temp1=0,temp2=0,i;  
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  /* System Clocks Configuration */
  RCC_Configuration();
USART_int(115200);
	PWM_Config();
	ADC_CONFIG();
	printf(" config done...\r\n");
	Get_ADC();
	delay_ms(1000);
	while(1)
	{
    printf("PWM-RGB TEST......\r\n");  

    delay_ms(500);
    i =	ADValue;	
		ADValue = Get_ADC();
		Volt = VREF*ADValue/4095;
		printf("===============================\r\n");
		printf("The ADC value is:%d\r\n",ADValue);
		printf("The Volt is:%f V\r\n",Volt);
		if(i != ADValue ){
       temp0=(ADValue-2000);
			temp1=ADValue-500;
			temp2=ADValue/1000;
			}		
		        TIM_SetCompare2(TIM2, temp0);  
            TIM_SetCompare3(TIM2, temp1);  
            TIM_SetCompare4(TIM2, temp2);
     		
    
			delay_ms(500);	
	}
}


#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
  


/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(EVAL_COM1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
  {}

  return ch;
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}

#endif

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

#include "stm32f10x.h"  
#include "stm32_eval.h"  
#include <stdio.h>      
#define VREF 3.3  
unsigned char i=0;  
void EXTIkeyS1_Config(void);  
/** @addtogroup STM32F10x_StdPeriph_Examples 
  * @{ 
  */  
  
/** @addtogroup EXTI_Config 
  * @{ 
  */   
  
/* Private typedef -----------------------------------------------------------*/  
/* Private define ------------------------------------------------------------*/  
/* Private macro -------------------------------------------------------------*/  
/* Private variables ---------------------------------------------------------*/  
GPIO_InitTypeDef   GPIO_InitStructure;  
USART_InitTypeDef USART_InitStructure;  
USART_ClockInitTypeDef USART_ClockInitStructure;  
EXTI_InitTypeDef   EXTI_InitStructure;  
NVIC_InitTypeDef   NVIC_InitStructure;  
void RCC_Configuration(void)  
{  
  RCC_DeInit();    
  RCC_HSICmd(ENABLE);  
  while(RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);  
  RCC_SYSCLKConfig(RCC_SYSCLKSource_HSI);  
  RCC_HSEConfig(RCC_HSE_OFF);  
  RCC_LSEConfig(RCC_LSE_OFF);  
  RCC_PLLConfig(RCC_PLLSource_HSI_Div2,RCC_PLLMul_9); //  72HMz  
  RCC_PLLCmd(ENABLE);  
  while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);  
  RCC_ADCCLKConfig(RCC_PCLK2_Div4);  
  RCC_PCLK2Config(RCC_HCLK_Div1);  
  RCC_PCLK1Config(RCC_HCLK_Div2);  
  RCC_HCLKConfig(RCC_SYSCLK_Div1);  
  RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);  
  while(RCC_GetSYSCLKSource() != 0x08);  
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOD, &GPIO_InitStructure);  
    GPIO_ResetBits(GPIOD,GPIO_Pin_2);  
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);  
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);//disable JTAG  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOC, &GPIO_InitStructure);  
    GPIO_SetBits(GPIOC,GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7);  
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); 
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_13|GPIO_Pin_14|GPIO_Pin_15;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;  
  GPIO_Init(GPIOB, &GPIO_InitStructure);  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_10|GPIO_Pin_11;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;  
  GPIO_Init(GPIOC, &GPIO_InitStructure);		
}     
  
void USART_int(long BaudRate)  
{  
      RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_USART1,ENABLE);  
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;  
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;   
    GPIO_Init(GPIOA, &GPIO_InitStructure);  
    /* PA10 USART1_Rx  */  
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;  
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;  
    GPIO_Init(GPIOA, &GPIO_InitStructure);  
    /* USARTx configured as follow: 
        - BaudRate = 115200 baud   
        - Word Length = 8 Bits 
        - One Stop Bit 
        - No parity 
        - Hardware flow control disabled (RTS and CTS signals) 
        - Receive and transmit enabled 
    */  
    USART_InitStructure.USART_BaudRate = BaudRate;//??????  
    USART_InitStructure.USART_WordLength = USART_WordLength_8b;//???????8bit  
    USART_InitStructure.USART_StopBits = USART_StopBits_1;//????1  
    USART_InitStructure.USART_Parity = USART_Parity_No;//????  
    USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//??????none  
    USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;//??????????  
      USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;       
    USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;        
    USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;        
    USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;  
    USART_ClockInit(USART1, &USART_ClockInitStructure);  
    USART_Init(USART1, &USART_InitStructure);  
    USART_Cmd(USART1, ENABLE);  
      USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);  
    USART_Cmd(USART1, ENABLE);  
}  
   
void Iic1_Init(void)  
{  
        GPIO_InitTypeDef GPIO_InitStructure;  
        I2C_InitTypeDef I2C_InitStructure;  
          
        RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);  
        RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);  
        //PB6-I2C2_SCL PB7-I2C2_SDA PB10-I2C2_SCL PB11-I2C2_SDA  
        /* Configure IO connected to IIC*********************/  
        GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_10 | GPIO_Pin_11;  
        GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;  
        GPIO_Init(GPIOB, &GPIO_InitStructure);  
          
        I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;  
        I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;  
        I2C_InitStructure.I2C_OwnAddress1 = 0xA0;  
        I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;  
        I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;  
        I2C_InitStructure.I2C_ClockSpeed = 400000;         
        I2C_Cmd(I2C2, ENABLE);     
        I2C_Init(I2C2, &I2C_InitStructure);  
        I2C_AcknowledgeConfig(I2C2, ENABLE);      
}  
  
void delay_us(u32 n)  
{  
    u8 j;  
    while(n--)  
    for(j=0;j<10;j++);  
}  
  
void  delay_ms(u32 n)  
{  
    while(n--)  
    delay_us(1000);  
}  
  
void shuju(unsigned char k)//显示0~9个数
{   
 if(k==0){GPIO_ResetBits(GPIOB,GPIO_Pin_7|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_14|GPIO_Pin_13|GPIO_Pin_8);} 
 if(k==1){GPIO_ResetBits(GPIOB,GPIO_Pin_9|GPIO_Pin_12);}
 if(k==2){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_9|GPIO_Pin_13|GPIO_Pin_14);}
 if(k==3){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_14);}
 if(k==4){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12);}
 if(k==5){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_12|GPIO_Pin_14);}
 if(k==6){GPIO_ResetBits(GPIOB,GPIO_Pin_7|GPIO_Pin_12|GPIO_Pin_14|GPIO_Pin_13|GPIO_Pin_8|GPIO_Pin_5);}
 if(k==7){GPIO_ResetBits(GPIOB,GPIO_Pin_7|GPIO_Pin_9|GPIO_Pin_12); }
 if(k==8){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_13|GPIO_Pin_14);}
 if(k==9){GPIO_ResetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_14);} 
}
void Data(unsigned char i){//依按键按下的次数显示出数字
	char h=0;
	for(;h<100;h--){
          GPIO_SetBits(GPIOB,GPIO_Pin_1);
			      shuju(i%10);
	             delay_ms(10);
			     GPIO_ResetBits(GPIOB,GPIO_Pin_1);
			     GPIO_SetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_13|GPIO_Pin_14);
		       GPIO_SetBits(GPIOB,GPIO_Pin_15);
	           shuju(i/10);
	             delay_ms(10);
				   GPIO_ResetBits(GPIOB,GPIO_Pin_15);
		       GPIO_SetBits(GPIOB,GPIO_Pin_5|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_12|GPIO_Pin_13|GPIO_Pin_14);
							 if(!GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_8)){break;}
    }	
}
  
void EXTIkeyS1_Config(void)  
{  
  /* Enable GPIOA clock */  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);  
    
  /* Configure PA.00 pin as input floating */  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;  
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;  
  GPIO_Init(GPIOA, &GPIO_InitStructure);  
  
  /* Enable AFIO clock */  
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);  
  
  /* Connect EXTI0 Line to PA.00 pin */  
  GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource8);  
  
  /* Configure EXTI0 line */  
  EXTI_InitStructure.EXTI_Line = EXTI_Line8;  
  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;  
  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;    
  EXTI_InitStructure.EXTI_LineCmd = ENABLE;  
  EXTI_Init(&EXTI_InitStructure);  
  
  /* Enable and set EXTI0 Interrupt to the lowest priority */  
  NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn;  
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;  
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;  
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;  
  NVIC_Init(&NVIC_InitStructure);  
}  
  
/**********************************************************************/  
/*IIC?????                                                                               */  
/*                                                                                                                                          */  
/**********************************************************************/  
void I2C2_WriteByte(unsigned char id,unsigned char write_address,unsigned char byte)  
{  
        while(I2C_GetFlagStatus(I2C2, I2C_FLAG_BUSY));  
        I2C_GenerateSTART(I2C2,ENABLE);  
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_MODE_SELECT));  
        I2C_Send7bitAddress(I2C2,id,I2C_Direction_Transmitter);  
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED));  
        I2C_SendData(I2C2, write_address);  
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED));  
        I2C_SendData(I2C2, byte);  
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED));  
        I2C_GenerateSTOP(I2C2, ENABLE);  
  
        do  
        {                  
                /* Send START condition */  
                I2C_GenerateSTART(I2C2, ENABLE);  
                /* Read I2C2 SR1 register */  
                /* Send EEPROM address for write */  
                I2C_Send7bitAddress(I2C2, 0xA0, I2C_Direction_Transmitter);  
        }while(!(I2C_ReadRegister(I2C2, I2C_Register_SR1) & 0x0002));  
  
        /* Clear AF flag */  
        I2C_ClearFlag(I2C2, I2C_FLAG_AF);  
        /* STOP condition */      
        I2C_GenerateSTOP(I2C2, ENABLE);    
}  
  
  
unsigned char I2C2_ReadByte(unsigned char  id, unsigned char read_address)  
{    
    unsigned char temp;           
    while(I2C_GetFlagStatus(I2C2, I2C_FLAG_BUSY)){}  
    I2C_GenerateSTART(I2C2, ENABLE);  
    while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_MODE_SELECT));  
    I2C_Send7bitAddress(I2C2, id, I2C_Direction_Transmitter);  
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED));  
    I2C_Cmd(I2C2, ENABLE);  
    I2C_SendData(I2C2, read_address);    
        while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_BYTE_TRANSMITTED));  
    I2C_GenerateSTART(I2C2, ENABLE);  
    while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_MODE_SELECT));  
    I2C_Send7bitAddress(I2C2, id, I2C_Direction_Receiver);  
    while(!I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED));  
    I2C_AcknowledgeConfig(I2C2, DISABLE);  
    I2C_GenerateSTOP(I2C2, ENABLE);  
    while(!(I2C_CheckEvent(I2C2, I2C_EVENT_MASTER_BYTE_RECEIVED)));  
             
    temp = I2C_ReceiveData(I2C2);    
    I2C_AcknowledgeConfig(I2C2, ENABLE);  
    return temp;  
}  
  
/* Private functions ---------------------------------------------------------*/  
  
/** 
  * @brief  Main program. 
  * @param  None 
  * @retval None 
  */  
int main(void)  
{    
  /* System Clocks Configuration */  
  RCC_Configuration();   
    USART_int(115200);    
    Iic1_Init();  
  EXTIkeyS1_Config();     
    printf(" config done...\r\n");  
    delay_ms(1000);  
    while(1)  
    {  
         i=I2C2_ReadByte(0xA0,0);     
     Data(i);
     if(i==99){i=0;}			
    }  
}         
  
void EXTI9_5_IRQHandler(void)  
{  
    if(EXTI_GetITStatus(EXTI_Line8) != RESET)  
  {  
        i++;  
        I2C2_WriteByte(0xA0,0,i);  
    EXTI_ClearITPendingBit(EXTI_Line8);  
  }  
}  
      
#ifdef  USE_FULL_ASSERT  
  
/** 
  * @brief  Reports the name of the source file and the source line number 
  *         where the assert_param error has occurred. 
  * @param  file: pointer to the source file name 
  * @param  line: assert_param error line source number 
  * @retval None 
  */  
void assert_failed(uint8_t* file, uint32_t line)  
{   
  /* User can add his own implementation to report the file name and line number, 
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */  
  
  /* Infinite loop */  
  while (1)  
  {  
  }  
}  
  
#endif  
  
/** 
  * @} 
  */   
  
/** 
  * @} 
  */   
  
#ifdef __GNUC__  
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf 
     set to 'Yes') calls __io_putchar() */  
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)  
#else  
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)  
#endif /* __GNUC__ */  
    
  
  
/** 
  * @brief  Retargets the C library printf function to the USART. 
  * @param  None 
  * @retval None 
  */  
PUTCHAR_PROTOTYPE  
{  
  /* Place your implementation of fputc here */  
  /* e.g. write a character to the USART */  
  USART_SendData(EVAL_COM1, (uint8_t) ch);  
  
  /* Loop until the end of transmission */  
  while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)  
  {}  
  
  return ch;  
}  
  
#ifdef  USE_FULL_ASSERT  
  
/** 
  * @brief  Reports the name of the source file and the source line number 
  *         where the assert_param error has occurred. 
  * @param  file: pointer to the source file name 
  * @param  line: assert_param error line source number 
  * @retval None 
  */  
void assert_failed(uint8_t* file, uint32_t line)  
{   
  /* User can add his own implementation to report the file name and line number, 
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */  
  
  /* Infinite loop */  
  while (1)  
  {  
  }  
}  
  
#endif  
  
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/