发个12864LCD程序学习一下-电子产品世界论坛

这些小活动你都参加了吗？快来围观一下吧！>>

电子产品世界 » 论坛首页 » 嵌入式开发 » MCU » 发个12864LCD程序学习一下

共5条 1/1 1 跳转至页

发个12864LCD程序学习一下

bowei

菜鸟

2010-09-10 16:12:42 打赏

只看楼主 1楼

//实验目的：熟悉12864LCD的使用
//12864LCD带中文字库
//编程让12864LCD显示公司LOGO和公司名字
//硬件设置：
//源程序来自：PIC单片机学习网  http://www.pic16.com
//关断所有拨码开关。

 #include <p30f6014.h>             //dsPIC30F6014标准头文件

  _FOSC(CSW_FSCM_OFF & XT_PLL4);  //4倍频晶振，Failsafe 时钟关闭
  _FWDT(WDT_OFF);                 //关闭看门狗定时器
  _FBORPOR(PBOR_OFF & MCLR_EN);   //掉电复位禁止，MCLR复位使能。
  _FGS(CODE_PROT_OFF);            //代码保护禁止

#define  di  LATBbits.LATB4       //命令/数据选择              
#define  rw  LATBbits.LATB5       //读/写选择
#define  e   LATBbits.LATB6       //使能
#define  psb LATBbits.LATB2       //8位/4位并口选择
#define  rst LATBbits.LATB7       //复位
         
 unsigned int __attribute__((address(0x900))) temp;  
 unsigned int __attribute__((address(0x902))) temp1;    

const unsigned char TAB1[ ]={         //定义显示图片的数据表
0X7F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFE,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X81,0X00,0X10,0X40,0X00,0X02,0X41,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X81,0X00,0X10,0X40,0X00,0X02,0X41,
0XFF,0XFF,0XC0,0X00,0X00,0X7F,0XFF,0XFF, 0X07,0XE2,0X00,0XFE,0XC0,0X00,0X06,0X01,
0XFF,0XFF,0X00,0X00,0X00,0X1F,0XFF,0XFF, 0X01,0X87,0XE0,0X00,0X80,0X03,0XFF,0XF1,
0XFF,0XFC,0X00,0X00,0X00,0X07,0XFF,0XFF, 0X01,0X04,0X00,0X44,0XFC,0X02,0X04,0X01,

0XFF,0XF0,0X00,0X00,0X00,0X07,0XFF,0XFF, 0X01,0X08,0X00,0X48,0X04,0X02,0X04,0X41,
0XFF,0XF0,0X00,0X00,0X00,0X03,0XFF,0XFF, 0X0F,0XD8,0X00,0X08,0X04,0X03,0XF6,0X81,
0XFF,0XF0,0X00,0X00,0X00,0X01,0XFF,0XFF, 0X08,0X40,0X01,0XFE,0XFC,0X06,0X27,0X01,
0XFF,0XF0,0X00,0X00,0X00,0X01,0XFF,0XFF, 0X0F,0XCF,0X80,0X01,0X00,0X04,0X23,0X01,
0XFF,0XF0,0X3F,0XF0,0X3F,0XC1,0XFF,0XFF, 0X08,0XC1,0X00,0X01,0X00,0X04,0XE7,0X21,
0XFF,0XF0,0X7F,0XE0,0X7F,0XC1,0XFF,0XFF, 0X10,0X82,0X01,0XF9,0XF8,0X08,0X99,0XA1,
0XFF,0XF0,0X7F,0XE0,0X7F,0XC1,0XFF,0XFF, 0X1F,0X86,0X01,0X09,0X00,0X08,0X10,0XE1,
0XFF,0XF0,0XFF,0XC0,0XFF,0XC1,0XFF,0XFF, 0X06,0X04,0X01,0X09,0XF0,0X00,0X00,0X01,

0XFF,0XF0,0XFF,0XC1,0XFF,0XC1,0XFF,0XFF, 0X04,0X08,0X01,0XFA,0X00,0X07,0XFF,0X01,
0XFF,0XF0,0XFF,0X83,0XFF,0XC1,0XFF,0XFF, 0X7F,0XD0,0X03,0X12,0X00,0X06,0X89,0X01,
0XFF,0XF0,0XFF,0X03,0XFF,0XC1,0XFF,0XFF, 0X04,0X10,0X83,0X13,0XF0,0X08,0X91,0X01,
0XFF,0XF0,0XFE,0X07,0XFF,0XC1,0XFF,0XFF, 0X04,0X10,0X83,0XF2,0X00,0X08,0X91,0X01,
0XFF,0XF0,0XFC,0X0F,0XFF,0XC1,0XFF,0XFF, 0X04,0X3F,0X02,0X12,0X08,0X1B,0X93,0X01,
0XFF,0XF0,0XFC,0X0F,0XFF,0XC1,0XFF,0XFF, 0X08,0X00,0X02,0X23,0XF0,0X3F,0XFF,0XC1,
0XFF,0XF0,0XF8,0X1F,0XFF,0XC1,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XF0,0XF0,0X3F,0XFF,0XC1,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,

0XFF,0XF0,0XF0,0X7F,0XFF,0XC1,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XF0,0XE0,0X00,0X1F,0XC1,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XF0,0XE0,0X00,0X0F,0XC1,0XFF,0XFF, 0X00,0X3F,0X80,0X1F,0X00,0X00,0XFF,0X01,
0XFF,0XF0,0XF0,0X00,0X07,0XC1,0XFF,0XFF, 0X00,0XFF,0XE0,0X1F,0X00,0X03,0XFF,0XC1,
0XFF,0XF0,0XF8,0X00,0X07,0XC1,0XFF,0XFF, 0X01,0XFF,0XF0,0X1F,0X00,0X07,0XFF,0XE1,
0XFF,0XF0,0XFC,0X00,0X03,0XC1,0XFF,0XFF, 0X03,0XFF,0XF8,0X1F,0X00,0X07,0XC7,0XE1,
0XFF,0XF0,0XFF,0XFF,0X83,0XC1,0XFF,0XFF, 0X07,0XE0,0XFC,0X1F,0X00,0X07,0XC3,0XE1,
0XFF,0XF0,0XFF,0XFF,0XC1,0XC1,0XFF,0XFF, 0X07,0XC0,0XFC,0X1F,0X00,0X07,0XC0,0X01,


0XFF,0XF0,0XFF,0XFF,0XC1,0XC1,0XFF,0XFF, 0X0F,0XC0,0X7E,0X1F,0X00,0X07,0XFC,0X01,
0XFF,0XF0,0XFF,0XFF,0X83,0XC1,0XFF,0XFF, 0X0F,0XC0,0X7E,0X1F,0X00,0X07,0XFF,0X81,
0XFF,0XF0,0XFF,0XFF,0X03,0XC1,0XFF,0XFF, 0X0F,0XC0,0X7E,0X1F,0X00,0X03,0XFF,0XC1,
0XFF,0XF0,0XFF,0XFE,0X07,0XC1,0XFF,0XFF, 0X0F,0XC0,0X7E,0X1F,0X00,0X00,0XFF,0XE1,
0XFF,0XF0,0XFF,0XFC,0X0F,0XC1,0XFF,0XFF, 0X0F,0XC0,0X7E,0X1F,0X00,0X00,0X1F,0XF1,
0XFF,0XF0,0XFF,0XFC,0X1F,0XC1,0XFF,0XFF, 0X0F,0XC6,0X7E,0X1F,0X00,0X00,0X03,0XF1,
0XFF,0XF0,0XFF,0XF8,0X3F,0XC1,0XFF,0XFF, 0X07,0XC7,0XFC,0X1F,0X00,0X0F,0X81,0XF1,
0XFF,0XF0,0XFF,0XF0,0X7F,0XC1,0XFF,0XFF, 0X07,0XE3,0XFC,0X1F,0X00,0X0F,0XC1,0XF1,

0XFF,0XF0,0X7F,0XE0,0X7F,0XC1,0XFF,0XFF, 0X03,0XFF,0XF8,0X1F,0XFF,0X87,0XE3,0XE1,
0XFF,0XF8,0X7F,0XC0,0XFF,0XC3,0XFF,0XFF, 0X03,0XFF,0XF8,0X1F,0XFF,0X87,0XFF,0XE1,
0XFF,0XF8,0X7F,0XC1,0XFF,0X83,0XFF,0XFF, 0X01,0XFF,0XFC,0X1F,0XFF,0X83,0XFF,0XC1,
0XFF,0XFC,0X3F,0X83,0XFF,0X07,0XFF,0XFF, 0X00,0X7F,0XFF,0X1F,0XFF,0X80,0XFF,0X01,
0XFF,0XFE,0X1F,0X07,0XFE,0X0F,0XFF,0XFF, 0X00,0X00,0X1F,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0X00,0X00,0X00,0X1F,0XFF,0XFF, 0X00,0X00,0X07,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0XFC,0X01,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0XF0,0X01,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,

0XFF,0XFF,0XC0,0X00,0X3F,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0X80,0X00,0X1F,0XFF,0XFF,0XCF, 0X3E,0X83,0XE7,0X3E,0X78,0X21,0X14,0XE1,
0XFF,0XFE,0X00,0X00,0X07,0XFF,0XFC,0X3F, 0X20,0X82,0X09,0X88,0X44,0X51,0X15,0X31,
0XFF,0XFC,0X7C,0X00,0X00,0XFF,0XC0,0X7F, 0X20,0X82,0X08,0X88,0X44,0X51,0X95,0X11,
0XFF,0XFF,0XFF,0XF0,0X00,0X00,0X01,0XFF, 0X20,0X82,0X08,0X08,0X44,0X89,0X95,0X01,
0XFF,0XFF,0XFF,0XFE,0X00,0X00,0X03,0XFF, 0X20,0X82,0X08,0X08,0X44,0X89,0X55,0X01,
0XFF,0XFF,0XFF,0XFF,0X80,0X00,0X07,0XFF, 0X3E,0X83,0XE8,0X08,0X44,0X89,0X55,0X01,
0XFF,0XFF,0XFF,0XFF,0XE0,0X00,0X1F,0XFF, 0X20,0X82,0X08,0X08,0X78,0X89,0X55,0X01,

0XFF,0XFF,0XFF,0XFF,0XFC,0X00,0XFF,0XFF, 0X20,0X82,0X08,0X08,0X48,0X89,0X55,0X01,
0XFF,0XFF,0XFF,0XFF,0XFE,0X03,0XFF,0XFF, 0X20,0X82,0X08,0X08,0X48,0X89,0X35,0X01,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X20,0X82,0X08,0X88,0X44,0X51,0X35,0X11,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X20,0X82,0X09,0X88,0X44,0X51,0X15,0X31,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X3E,0XF3,0XE7,0X08,0X44,0X21,0X14,0XE1,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,
0X7F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF, 0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFE,

};
 unsigned int lcd_x;               //X地址         
 unsigned int lcd_y;               //Y地址
//  bit busy;                        //忙标志位
 
void init();                       //系统初始函数
void lcd_init();                   //LCD初始函数 
void clear_p();                    //清屏函数
void han_wr2a();                   //写函数    
void wr_zb();                      //写准备函数
void qushu();                      //查表函数
void send_d(unsigned char x);      //写一字节数据函数
void send_i(unsigned char x);      //写一字节命令函数
void chk_busy();                   //查LCD忙函数
void delay();

//-------------------------------------------
int main(void)
{
       init();                    //系统初始化
       lcd_init();                //LCD初始化
       clear_p();                 //清除显示
       qushu();                   //写数据到LCD显示
        while(1);
}

//-------------------------------------------
void init()
{
  TRISB=0X0000;                     //设置B口为输出   
  TRISD=0X0000;                     //设置D口为输出
}

//-------------------------------------------
void lcd_init()
{
  rst=0;                         //复位LCD
  delay();                        
  rst=1;                         //LCD正常工作
  delay();       
  psb=1;                         //8位并行通信
  send_i(0x30);                  //基本操作指令
  send_i(0x01);                  //关显示  
  send_i(0x06);                  //指定在写入或读取时，光标的移动方向
  send_i(0x0c);                  //开显示，关光标，不闪烁
}

//-------------------------------------------
void wr_zb()
{
  send_i(0x34);                  //扩展操作指令
  send_i(lcd_y);                 //设置Y地址
  send_i(lcd_x);                 //设置X地址
  send_i(0x30);                  //基本操作指令
}

//-------------------------------------------
void clear_p()
{
  send_i(0x1);                   //清除显示
  send_i(0x34);                  //扩展操作指令
  send_i(0x30);                  //基本操作指令
}

//------------------------------------------
void qushu()
{
  unsigned char i,j,k;          //定义临时变量     
  temp=0;                        //查表偏移地址
  lcd_x=0x0080;                    //上半屏X地址80H
  for(i=0;i<2;i++)               //共两屏
     {  
       lcd_y=0x0080;               //每一行的Y地址80H（即顶格显示）
       for(j=0;j<32;j++)       //每半屏共20H行
          {
             wr_zb();            //写准备（设置X地址和Y地址）
             for(k=0;k<16;k++) //每一行16字节（因为顶格写）
                {  
                   temp1=TAB1[temp]; //查表获取显示数字
                   send_d(temp1);    //送LCD显示
                   temp++;       //查表偏移地址+1
                }
             lcd_y++;            //送下一行数据
             send_i(0x0036);       //扩展指令操作：图形显示开
             send_i(0x0030);       //基本指令操作
          }
        lcd_x=0X0088;              //下半屏X地址
     }
}

//-------------------------------------------
void send_d(unsigned char x)
{
   chk_busy();                   //判断LCD是否忙
   di=1;                         //总线上是数据    
   delay();     
   rw=0;                         //写操作
   delay();
   PORTD=x;                      //数据送总线
   e=1;                          //使能
   delay();                       
   e=0;    
   delay();                   
}

//--------------------------------------------
void send_i(unsigned char x)
{
   chk_busy();                   //判断忙信号
   di=0;                         //总线上是命令
   delay();
   rw=0;                         //写操作
   delay();
   PORTD=x;                      //数据送总线
   e=1;                          //使能
   delay();
   e=0;    
   delay();              
}

//-------------------------------------------
void chk_busy()
{  
//   busy=1;                       //先置忙信号     
   TRISD=0Xffff;                   //更改总线方向为输入
   di=0;                         //总线上为命令
   delay();
   rw=1;                         //读操作
   delay();
   while(PORTDbits.RD7)                  
      {
         delay();
         delay();
         e=1;                   
         delay();
         delay();
         e=0;                   
      }
   e=0;                         
   TRISD=0X0000;                  //总线还原为输出   
 }

//-------------------------------------------
void delay()
{
    int m;
    for(m=0;m<10;m++)
       {;}
}

关键词：发个 12864LCD 程序学习一下显示 u

bowei

菜鸟

2010-09-10 16:13:54 打赏

2楼

bowei

菜鸟

2010-09-10 16:27:37 打赏

3楼

QLdsPIC3 PIC单片机综合开发实验系统 http://www.pic16.com/wzcapi/dspic3.htm

zhangyong90

菜鸟

2010-09-26 18:35:57 打赏

4楼

这个板子不错吧！功能应该挺多的

love2mcu

菜鸟

2010-10-14 07:54:11 打赏

5楼

板子能送我吗

共5条 1/1 1 跳转至页

发新帖

每日签到

有奖活动
【有奖活动】分享工程师的一天
【工程师专属福利】每天30秒，积分轻松拿！EEPW宠粉打卡计划启动！
送您一块开发板，2025年“我要开发板活动”又开始了！
分享开发笔记，赚取电动螺丝刀（便携轻巧与无刷电机两款可选）
看《关键跃升》，聊聊工作心法、动力、能力、沟通与协作，从五个方面深入交流你的工作心得
春风十里，不如现场有你｜来领取你2025慕尼黑上海电子展观众预登记的奖励吧！
我要给自己挣一部逻辑分析仪
【有奖活动】EEPW网站征稿正在进行时，欢迎踊跃投稿啦

打赏帖
【Zephyr】MCXN947 Zephyr 开发入门适配shell被打赏20分
【我要开发板】6.联合MATLAB记录数据被打赏50分
【瑞萨RA2E1开发板】：使用ADC功能实现位移传感器采集方案被打赏20分
【nRF7002DK】基于sht30的温湿度计被打赏20分
【nRF7002DK】日志打印被打赏20分
【换取手持示波器】RGB屏幕移植ARM-2D库被打赏35分
【分享开发笔记，赚取电动螺丝刀】分享一下如何解决瑞萨RA2E1使用printf编译报错问题被打赏27分
rtthread硬件加密-5hash加密分析被打赏10分
【换取手持示波器】Mongoose 零代码创建网页仪表盘被打赏33分
【分享开发笔记，赚取电动螺丝刀】基于.Net6.0 WPF简单做一个MQTT收发小工具被打赏24分

热门分类
STM32	MCU
通讯及无线技术	物联网技术
电子DIY	板卡试用
基础知识	软件与操作系统
我爱生活	小e食堂

EEPW论坛

发个12864LCD程序学习一下

回复