通宵整晚都没停销过，一直在专注的焊板子。。。
很喜欢这种感觉！
谁叫我是电子爱好者呢~
流水灯代码：
#include <reg52.h>
unsigned char code seg[]={0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0x00,0,0x55,0x55,0xaa,0xaa};
void delay(unsigned int cnt)
{
while(--cnt);
}
main()
{
unsigned char i;
while(1)
{
P1=0xFE;
for(i=0;i<8;i++)
{
delay(10000);
P1 <<=1;
}
P1=0x7F;
for(i=0;i<8;i++)
{
delay(10000);
P1 >>=1;
}
P1=0xFE;
for(i=0;i<8;i++)
{
delay(10000);
P1 <<=1;
P1 |=0x01;
}
P1=0x7F;
for(i=0;i<8;i++)
{
delay(10000);
P1 >>=1;
P1 |=0x80;
}
for(i=0;i<16;i++)
{
delay(20000);
P1=seg[i];
}
}
}
#include <reg52.h>
unsigned char code seg[]={0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0x00,0,0x55,0x55,0xaa,0xaa};
void delay(unsigned int cnt)
{
while(--cnt);
}
main()
{
unsigned char i;
while(1)
{
P1=0xFE;
for(i=0;i<8;i++)
{
delay(10000);
P1 <<=1;
}
P1=0x7F;
for(i=0;i<8;i++)
{
delay(10000);
P1 >>=1;
}
P1=0xFE;
for(i=0;i<8;i++)
{
delay(10000);
P1 <<=1;
P1 |=0x01;
}
P1=0x7F;
for(i=0;i<8;i++)
{
delay(10000);
P1 >>=1;
P1 |=0x80;
}
for(i=0;i<16;i++)
{
delay(20000);
P1=seg[i];
}
}
}
驱动1602液晶代码：
#include<reg52.h>
#include<stdio.h>
#include<intrins.h>
sbit RS = P2^4;
sbit RW = P2^5;
sbit E = P2^6;
#define Data P0
char data TimeNum[]=" ";
char data Test1[]=" ";
void DelayUs(unsigned char us)
{
unsigned char uscnt;
uscnt=us>>1;
while(--uscnt);
}
void DelayMs(unsigned char ms)
{
while(--ms)
{
DelayUs(250);
DelayUs(250);
DelayUs(250);
DelayUs(250);
}
}
void WriteCommand(unsigned char c)
{
DelayMs(5);
E=0;
RS=0;
RW=0;
_nop_();
E=1;
Data=c;
E=0;
}
void WriteData(unsigned char c)
{
DelayMs(5);
E=0;
RS=1;
RW=0;
_nop_();
E=1;
Data=c;
E=0;
RS=0;
}
void ShowChar(unsigned char pos,unsigned char c)
{
unsigned char p;
if (pos>=0x10)
p=pos+0xb0;
else
p=pos+0x80;
WriteCommand (p);
WriteData (c);
}
void ShowString (unsigned char line,char *ptr)
{
unsigned char l,i;
l=line<<4;
for (i=0;i<16;i++)
ShowChar (l++,*(ptr+i));
}
void InitLcd()
{
DelayMs(15);
WriteCommand(0x38);
WriteCommand(0x38);
WriteCommand(0x38);
WriteCommand(0x06);
WriteCommand(0x0c);
WriteCommand(0x01);
}
void main(void)
{
InitLcd();
DelayMs(15);
sprintf(Test1,"www.eepw.com.cn ");
ShowString(0,Test1);
sprintf(TimeNum,"583199723MCU DIY");
ShowString(1,TimeNum);
while(1);
}
回复
| 打赏帖 | |
|---|---|
| 【STM32F769】AI之与本地deepseek对接被打赏50分 | |
| Buck电路工作在CCM模式下电感电流的计算公式是什么？被打赏5分 | |
| buck电路工作原理被打赏5分 | |
| 基于MSPM0L1306的MODBUS-RTU协议通讯实验被打赏100分 | |
| 我想要一部加热台+多合一调试工具被打赏18分 | |
| 每周了解几个硬件知识+485硬件知识分享被打赏10分 | |
| 【换取手持数字示波器】树莓派PICO调试器官方固件本地化部署实践被打赏24分 | |
| 【换取手持数字示波器】分享一个KEIL无法识别CMSIS-DAP调试器的解决办法被打赏20分 | |
| 【换取手持数字示波器】分享一个自制的ArduinoNano扩展板底板被打赏23分 | |
| 【换取手持示波器】树莓派PICOW网页烟花被打赏18分 | |
STM32
MCU
通讯及无线技术
物联网技术
电子DIY
板卡试用
基础知识
软件与操作系统
我爱生活
小e食堂