【应用手册】AN 547: Putting the MAX II CPLD in Hibernation Mode to Achieve Zero Standby Current
To save power, the MAX® II CPLD can be completely powered down into hibernation mode during an inactive period. The CPLD can power down automatically, and allow the system to power it up again when the system requires the CPLD to execute a task, while retaining the register data.
This application note discusses an example system in which MAX II registers’ data is automatically stored before the power supply is cut off after a certain predefined idle period, and the data is automatically reloaded back into the registers when the system is powered up again.an547.pdf
共1条
1/1 1 跳转至页
【应用手册】AN 547: Putting the MAX II CPLD in Hibernation Mode to Achieve Zero Standb
共1条
1/1 1 跳转至页
回复
有奖活动 | |
---|---|
【EEPW电子工程师创研计划】技术变现通道已开启~ | |
发原创文章 【每月瓜分千元赏金 凭实力攒钱买好礼~】 | |
【EEPW在线】E起听工程师的声音! | |
“我踩过的那些坑”主题活动——第001期 | |
高校联络员开始招募啦!有惊喜!! | |
【工程师专属福利】每天30秒,积分轻松拿!EEPW宠粉打卡计划启动! | |
送您一块开发板,2025年“我要开发板活动”又开始了! | |
打赏了!打赏了!打赏了! |
打赏帖 | |
---|---|
电流检测模块MAX4080S被打赏10分 | |
【我踩过的那些坑】calloc和malloc错误使用导致跑飞问题排查被打赏50分 | |
多组DCTODC电源方案被打赏50分 | |
【我踩过的那些坑】STM32cubeMX软件的使用过程中的“坑”被打赏50分 | |
新手必看!C语言精华知识:表驱动法被打赏50分 | |
【我踩过的那些坑】杜绑线问题被打赏50分 | |
【我踩过的那些坑】STM32的硬件通讯调试过程的“坑”被打赏50分 | |
【我踩过的那些坑】晶振使用的问题被打赏100分 | |
【我踩过的那些坑】电感选型错误导致的处理器连接不上被打赏50分 | |
【我踩过的那些坑】工作那些年踩过的记忆深刻的坑被打赏10分 |