用KEIL 进行仿真----BSRR BRR----不正常显示求解
#include "stm32f10x.h"
#include "LED.h"
void Key_Init(void);
int main(void)
{
Led_TypeDef led=LED2;
Key_Init();
LED_Init(led);
while(1)
{
GPIO_SetBits (GPIOE, led) ;
if(GPIO_ReadInputDataBit (GPIOF, GPIO_Pin_11)==0)
{
LED_Set(led, ON);
}
else
//LED_Set(led, OFF);
GPIO_SetBits (GPIOE, led) ;//这个函数不就是操作BRR的吗?仿真值不变,挺奇怪
}
}
#include "stm32f10x.h"
#include "LED.h"
void Key_Init(void);
int main(void)
{
Led_TypeDef led=LED2;
Key_Init();
LED_Init(led);
while(1)
{
GPIO_SetBits (GPIOE, led) ;
if(GPIO_ReadInputDataBit (GPIOF, GPIO_Pin_11)==0)
{
LED_Set(led, ON);
}
else
//LED_Set(led, OFF);
GPIO_SetBits (GPIOE, led) ;//
}
}
在这里,你稍微帮着看一下
#include "stm32f10x.h"
void Key_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* GPIOD Periph clock enable */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOF, ENABLE);
/* Configure PF11 in GPIO_Mode_IPU mode 上拉输入*/
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOF, &GPIO_InitStructure);
}
void LED_Init(Led_TypeDef led)
{
GPIO_InitTypeDef GPIO_InitStructure;
//RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOE, ENABLE);
//RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOG, ENABLE);
GPIO_InitStructure.GPIO_Pin=led;
GPIO_InitStructure.GPIO_Mode=GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;//配置GPIO速度为50MHz
GPIO_Init(LED_GPIO_PORT,&GPIO_InitStructure);//初始化LED相关的GPIO
// GPIO_InitStructure.GPIO_Pin=GPIO_Pin_All;
GPIO_Init(GPIOE,&GPIO_InitStructure);
//GPIO_Init(GPIOA,&GPIO_InitStructure);
}
回复
有奖活动 | |
---|---|
请大声喊出:我要开发板! | |
【有奖活动】EEPW网站征稿正在进行时,欢迎踊跃投稿啦 | |
【有奖活动】智能可穿戴设备AR/VR如何引领科技新潮流! | |
奖!发布技术笔记,技术评测贴换取您心仪的礼品 | |
【有奖活动】震撼来袭!这场直播将直击工程师的心灵! |
打赏帖 | |
---|---|
【换取手持数字示波器】+AT89C2051串口接收数据显示到LCD1602上被打赏50分 | |
【分享评测,赢取加热台】+AT89C2051控制NRF24L01收发数据被打赏50分 | |
【分享评测,赢取加热台】迪文屏设计实战技巧被打赏40分 | |
“DFRobot盖革计数器模块评测”基础模型搭建被打赏50分 | |
【换取手持数字示波器】+角点检测----Harris被打赏40分 | |
【换取手持数字示波器】常见音频指标被打赏20分 | |
【分享评测,赢取加热台】从零配置MCX-N947——PWM(SCtimer)被打赏50分 | |
【分享评测,赢取加热台】实际测试MCX-N947——PWM(Ctimer)被打赏50分 | |
【换取手持数字示波器】红外触摸框及各类红外设备的工作原理被打赏20分 | |
【换取手持数字示波器】+精英板驱动两相四线步进电机被打赏10分 |