3月9号 申请
3月26号收基础包,中间采购零件陆续收到
3月29号收到PCB
4月6号焊接,我是一次性焊完成的。对自己的烙铁技术还是有信心的。哈哈……
正面
背面
焊接完成后真接上电下载程试,一切顺利 ,偶也
LED跑马灯
共3条
1/1 1 跳转至页
hile ARM DIY进程帖[hile]
关键词: 进程
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
通过了,恢常的兴奋…………,等等PCB和零件
评论
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
自己作的COM下载线下载时没成功,还以为没焊好,吓得我一身冷汗,折腾了半天,找来USB TO COM 下载,偶也……贼爽,一下就能找到设备
评论
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
共3条
1/1 1 跳转至页
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 496
回复
有奖活动 | |
---|---|
【有奖活动】分享技术经验,兑换京东卡 | |
话不多说,快进群! | |
请大声喊出:我要开发板! | |
【有奖活动】EEPW网站征稿正在进行时,欢迎踊跃投稿啦 | |
奖!发布技术笔记,技术评测贴换取您心仪的礼品 | |
打赏了!打赏了!打赏了! |
打赏帖 | |
---|---|
与电子爱好者谈读图四被打赏50分 | |
与电子爱好者谈读图二被打赏50分 | |
【FRDM-MCXN947评测】Core1适配运行FreeRtos被打赏50分 | |
【FRDM-MCXN947评测】双核调试被打赏50分 | |
【CPKCORRA8D1B评测】---移植CoreMark被打赏50分 | |
【CPKCORRA8D1B评测】---打开硬件定时器被打赏50分 | |
【FRDM-MCXA156评测】4、CAN loopback模式测试被打赏50分 | |
【CPKcorRA8D1评测】--搭建初始环境被打赏50分 | |
【FRDM-MCXA156评测】3、使用FlexIO模拟UART被打赏50分 | |
【FRDM-MCXA156评测】2、rt-thread MCXA156 BSP制作被打赏50分 |