收到警告信了,感觉问题有点严重。实际上我们一直在进行,只不过没有发帖而已。
我们申请该开发板是正在做一个“真刀实枪”的项目。经过比较,觉得RL78系列的低功耗是一个突出特色,在收到开发板后就去联系代理商购买器件。现在虽然仍以RL78来做,但发现一个重要的问题:现在生产的型号中片上RAM没有能够达到4kB的,这点在联系购买芯片后才知道。我们原方案中对32点对1点、采用时间轮片方式通讯、采样速度高达400SPS的物联网项目来说,传感节点没有足够的缓冲,按最初设想研制就成为不可能的任务。现在做到的方案只能改为:6对1的方式,再把接收端的6组汇集到一起。
而在传感节点的“开发”,因我们具有特有的技术,可以做到目前可以说最简单、最小体积和最低功耗的传感与模拟信号处理,几乎不能称为“开发”,仅仅是再现而已。
共3条
1/1 1 跳转至页
磨刀不误砍柴工
关键词: 磨刀不误砍柴工
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
算不上是警告信,但总归干事情需要有规矩,自己答应的事情就应当兑现,是不是?
评论
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
你可以先考虑实现一个,然后再用同类产品替换就OK了。
评论
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 426
共3条
1/1 1 跳转至页
Notice: Trying to get property of non-object in /xp/www/www.eepw.com.cn/eepw/rootapp/views/scripts/forum/thread.phtml on line 496
回复
有奖活动 | |
---|---|
【有奖活动】分享技术经验,兑换京东卡 | |
话不多说,快进群! | |
请大声喊出:我要开发板! | |
【有奖活动】EEPW网站征稿正在进行时,欢迎踊跃投稿啦 | |
奖!发布技术笔记,技术评测贴换取您心仪的礼品 | |
打赏了!打赏了!打赏了! |
打赏帖 | |
---|---|
与电子爱好者谈读图四被打赏50分 | |
与电子爱好者谈读图二被打赏50分 | |
【FRDM-MCXN947评测】Core1适配运行FreeRtos被打赏50分 | |
【FRDM-MCXN947评测】双核调试被打赏50分 | |
【CPKCORRA8D1B评测】---移植CoreMark被打赏50分 | |
【CPKCORRA8D1B评测】---打开硬件定时器被打赏50分 | |
【FRDM-MCXA156评测】4、CAN loopback模式测试被打赏50分 | |
【CPKcorRA8D1评测】--搭建初始环境被打赏50分 | |
【FRDM-MCXA156评测】3、使用FlexIO模拟UART被打赏50分 | |
【FRDM-MCXA156评测】2、rt-thread MCXA156 BSP制作被打赏50分 |