/*
环境:STC89C52
DS18B20接P1^2
数码管(四位一体共阴极数码管)P3口位选:0x77,0x6f,0x5f,0x3f
段选:P2。
*/
#include "reg52.h"
#define uchar unsigned char
#define uint unsigned int
uint temp;
float f_temp;
sbit ds=P1^2; //温度传感器信号线
uchar code table[]= //不带小数点
{
0xfc,0x60,0xD9,0xf1,0x65,0xb5,0xbd,0xe0,0xfd,0xf5
};
unsigned char code table1[]= //带小数点
{
0xfe,0x62,0xdb,0xf3,0x67,0xb7,0xbf,0xe2,0xff,0xf7
};
uchar code table2[]= //位选
{
0x77,0x6f,0x5f,0x3f
};
void delay(uint z)//延时函数
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void dsreset(void) //18B20复位,初始化函数
{
uint i;
ds=0;
i=103;
while(i>0)i--;
ds=1;
i=4;
while(i>0)i--;
}
bit tempreadbit(void) //读1位函数
{
uint i;
bit dat;
ds=0;i++; //i++ 起延时作用
ds=1;i++;i++;
dat=ds;
i=8;while(i>0)i--;
return (dat);
}
uchar tempread(void) //读1个字节
{
uchar i,j,dat;
dat=0;
for(i=1;i<=8;i++)
{
j=tempreadbit();
dat=(j<<7)|(dat>>1); //读出的数据最低位在最前面,这样刚好一个字节在DAT里
}
return(dat);
}
void tempwritebyte(uchar dat) //向18B20写一个字节数据
{
uint i;
uchar j;
bit testb;
for(j=1;j<=8;j++)
{
testb=dat&0x01;
dat=dat>>1;
if(testb) //写 1
{
ds=0;
i++;i++;
ds=1;
i=8;while(i>0)i--;
}
else
{
ds=0; //写 0
i=8;while(i>0)i--;
ds=1;
i++;i++;
}
}
}
void tempchange(void) //DS18B20 开始获取温度并转换
{
dsreset();
delay(1);
tempwritebyte(0xcc); // 写跳过读ROM指令
tempwritebyte(0x44); // 写温度转换指令
}
uint get_temp() //读取寄存器中存储的温度数据
{
uchar a,b;
dsreset();
delay(1);
tempwritebyte(0xcc);
tempwritebyte(0xbe);
a=tempread(); //读低8位
b=tempread(); //读高8位
temp=b;
temp<<=8; //两个字节组合为1个字
temp=temp|a;
f_temp=temp*0.0625; //温度在寄存器中为12位 分辨率位0.0625°
temp=f_temp*10+0.5; //乘以10表示小数点后面只取1位,加0.5是四舍五入
f_temp=f_temp+0.05;
return temp; //temp是整型
}
////////////////////显示程序//////////////////////////
void display()
{
uchar i;
uchar ge,shi,bai;
i=get_temp();
//temp=256;
bai=temp/100;
shi=temp%100/10;
ge=temp%100%10;
P3=0x77;
P2=table[bai];
delay(1);
P3=0x6f;
P2=table1[shi];
delay(1);
P3=0x5f;
P2=table[ge];
delay(1);
P3=0x3f;
P2=0x9c;
}
void main()
{
P3=0;
P2=0;
while(1)
{
tempchange();
display();
}
}