-> inetstatShow Active Internet connections (including servers) PCB Proto Recv-Q Send-Q Local Address Foreign Address (state) -------- ----- ------ ------ ------------------ ------------------ ------- 7d7bec8 TCP 0 0 0.0.0.0.23 0.0.0.0.0 7d7c264 UDP 0 0 0.0.0.0.0 0.0.0.0.0 7d7bfd0 UDP 0 0 192.168.103.3.1025 0.0.0.0.0 [color=#DC143C]7d7bf4c UDP 313 0 0.0.0.0.161 0.0.0.0.0 SNMP任务161端口 7d7be44 UDP 5408 0 0.0.0.0.8002 0.0.0.0.0 7d7bd3c UDP 1348 0 0.0.0.0.8001 0.0.0.0.0 [/color] 7d7bdc0 UDP 0 0 0.0.0.0.53 0.0.0.0.0 7d79480 UDP 0 0 127.0.0.1.1024 127.0.0.1.17185 7d79270 UDP 0 0 0.0.0.0.17185 0.0.0.0.0 buffer中是有数据的，但为什么任务得不到？ -> tt tSnmp 33170c vxTaskEntry +60 : 8628c () 86640 snmpInit +480: [color=#DC143C]recvfrom [/color]() 2f2e20 recvfrom +f8 : bsdRecvfrom () 2e571c bsdRecvfrom +84 : splnet () 31a6e4 splnet +50 : semTake () 2c2320 semTake +140: semMTake () value = 0 = 0x0 -> -> tt 0x266b3f0 33170c vxTaskEntry +60 : 243e4c () 243e4c radius_receive_packet_task+71c: radius_receive_request (6) 2453dc radius_receive_request+5e4: radius_request_state_machine () 2455f8 radius_request_state_machine+1dc: radius_receive_acct_end_request (da03c522) 2480b0 radius_receive_acct_end_request+fc : radius_send_acct_end_request () 244afc radius_send_acct_end_request+184: radiusSendQuest (2669140, 9d, 280f7d8) 247204 radiusSendQuest+3d4: sendto () 2f2ae8 sendto +f8 : bsdSendto () 2e4dc4 bsdSendto +a4 : splnet () 31a6e4 splnet +50 : semTake () 2c2320 semTake +140: semMTake () value = 0 = 0x0 -> 请众高人一议。 [align=right][color=#000066][此贴子已经被作者于2003-6-27 17:22:44编辑过][/color][/align]