position 1 EDA Support Engineer
A CAD Support engineer to provide direct technical support to analog or digital designers using corporate supported CAD tools, flows, methodologies and design collaterals. In this role, the engineer will work both independently and collaboratively with other team members in the local CAD Group and with corporate R&D to address customer issues and bugs. Report customer service requests, monitor/track bugs and conduct CAD tool training sessions.
position 2 Senior ASIC CAD Engineer
Job Description:
· Participate in the design and implementation of the leading edge, front-to-back ASIC design flow which covers logical and physical implementation and analysis of complex devices that integrate multiple cores and IP’s from organizations with global teams.
· Participate in the research of Design Methodology to improve automation and productivity to produce new high-quality cutting-edge products
· Technical support and programming
Interface with EDA venders on technology
Preferred Experience:
major in EE, CS or related, Master Degree with 3+ years or Bachelor with 5+ years working experiences
· good programming skill with one or more languages (e.g. tcl, perl , python, c/c++, etc) in unix/linux and a strong desire to automate flow
· experience in ASIC design (digital design, Front-end or Back-end)
· Be good at Static timing analysis ( related EDA tool is Primetime, used by both Front-end and Back-end design team)
· familiar with one or more ASIC flows (logic synthesis, STA, formality check, Design for Power (UPF/CPF) ) and usage of related EDA tools
· Good written and spoken English
· Good communication skills and be able to work both independently and in a team
position 3 Senior /Staff CAD Engineer of Physical Design
联系人cherry
email:cherry.wang@talentsii.com
msn:wqxsycjs@hotmail.com
QQ:153329176
共1条
1/1 1 跳转至页
TOP USA IC Company looking CAD Engineer,located in shanghai or beijing
共1条
1/1 1 跳转至页
回复
| 有奖活动 | |
|---|---|
| 2026年“我要开发板活动”第三季，开始了！ | |
| 硬核工程师专属补给计划——填盲盒 | |
| “我踩过的那些坑”主题活动——第002期 | |
| 【EEPW电子工程师创研计划】技术变现通道已开启~ | |
| 发原创文章 【每月瓜分千元赏金 凭实力攒钱买好礼~】 | |
| 【EEPW在线】E起听工程师的声音！ | |
| 高校联络员开始招募啦！有惊喜！！ | |
| 【工程师专属福利】每天30秒，积分轻松拿！EEPW宠粉打卡计划启动！ | |
 我要赚赏金打赏帖 |
|
|---|---|
| 以启明云端ESP32P4开发板实现TF卡读写功能被打赏￥28元 | |
| 【分享开发笔记，赚取电动螺丝刀】树莓派5串口UART0配置被打赏￥25元 | |
| 【STM32F103ZET6】17:分享在Rtos项目中断管理的使用经验被打赏￥23元 | |
| 【STM32F103ZET6】16:分享在中断中恢复串口任务，遇到的问题被打赏￥31元 | |
| 在FireBeetle2ESP32-C5上实现温度大气压检测及显示被打赏￥21元 | |
| 【分享开发笔记，赚取电动螺丝刀】SAME51双串口收发配置被打赏￥27元 | |
| Chaos-nano操作系统在手持式VOC检测设备上的应用被打赏￥37元 | |
| 【分享开发笔记，赚取电动螺丝刀】关于在导入第三方库lib时，wchart类型冲突的原因及解决方案被打赏￥30元 | |
| 在FireBeetle2ESP32-C5上实现温湿度检测和显示被打赏￥20元 | |
| 在FireBeetle2ESP32-C5上实现光照强度检测及显示被打赏￥21元 | |
STM32
MCU
通讯及无线技术
物联网技术
电子DIY
板卡试用
基础知识
软件与操作系统
我爱生活
小e食堂
