【应用笔记】为高速通道设计优化由表面贴装焊盘引起的阻抗不连续(Optimizing Impedance Discontinuity Caused by Surface Mount Pads for High-Speed Channel Designs)
由于数据传输速率不断增加,如今的高速板设计师对升级他们的设计来满足不断增张的带宽需求,面临巨大挑战。
As data rates continue to increase, today’s high-speed board designers
face tremendous challenges upgrading their designs to meet increasing
bandwidth requirements. When implementing high-speed designs, any
small discontinuities in the physical geometries along the transmission
path can significantly degrade the signal. This degradation includes loss
of signal amplitude, reduction of signal rise time, and increased jitter. As
a result, you must be able to identify these discontinuities in the
high-speed channel and provide ways to mitigate their effects for better
signal transmission.an530.pdf
共1条
1/1 1 跳转至页
【应用笔记】为高速通道设计优化由表面贴装焊盘引起的阻抗不连续(Optimizing Impedance Discontinuity Caused by Surf
共1条
1/1 1 跳转至页
回复
我要赚赏金打赏帖 |
|
|---|---|
| bsp_log:RTT分级日志封装被打赏¥16元 | |
| SEGGER RTT常用API函数讲解被打赏¥14元 | |
| 【S32K3学习整理】S32K388 四核启动被打赏¥23元 | |
| 【S32K3学习整理】Lockstep和Decoupled 模式被打赏¥28元 | |
| 嵌入式芯片调试神器-J-Link RTT被打赏¥21元 | |
| 人体红外PIR感应传感器使用(ESP32S3)被打赏¥26元 | |
| 一种有效完成脚本程序测试的方法被打赏¥28元 | |
| WorkBuddy搭配SolidCraft给开发板做两件式外壳被打赏¥33元 | |
| 开箱一块k230被打赏¥33元 | |
| 【瑞萨RA8D1测评】RA8D1+lwIP网络验证与TCPOTA的实验记录被打赏¥33元 | |
我要赚赏金
