共1条
1/1 1 跳转至页
求救!!gdberver问题

只看楼主 1楼
[root@gyh foo]# arm-elf-gdb foo.gdb
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(gdb) target remote 192.168.0.100:2352
Remote debugging using 192.168.0.100:2352
Couldn't establish connection to remote target
Reply contains invalid hex digit 59
(gdb)
开发板端:
# gdbserver 192.168.0.100:2352 foo
Process foo created; pid = 32
code at 0c3a4040 - 0c3a5160, data at 0c3a5164
Remote debugging using 192.168.0.100:2352
readchar: Got EOF
RemotRxLength more long than 5ea
e side has terminated connection. GDBserver will reopen the connection.
说明:我是先启动的gdbserver
关键词: 求救 gdberver 问题
共1条
1/1 1 跳转至页
回复
打赏帖 | |
---|---|
汽车电子中巡航控制系统的使用被打赏10分 | |
分享汽车电子中巡航控制系统知识被打赏10分 | |
分享安全气囊系统的检修注意事项被打赏10分 | |
分享电子控制安全气囊计算机知识点被打赏10分 | |
【分享开发笔记,赚取电动螺丝刀】【OZONE】使用方法总结被打赏20分 | |
【分享开发笔记,赚取电动螺丝刀】【S32K314】芯片启动流程分析被打赏40分 | |
【分享开发笔记,赚取电动螺丝刀】【S32K146】S32DS RTD 驱动环境搭建被打赏12分 | |
【分享开发笔记,赚取电动螺丝刀】【IAR】libc标注库time相关库函数使用被打赏23分 | |
LP‑MSPM0L1306开发版试用结果被打赏10分 | |
【分享开发笔记,赚取电动螺丝刀】【LP-MSPM0L1306】适配 RT-Thread Nano被打赏23分 |