【应用笔记】AN417:采用C2H编译器加速功能实现DMA散射收集校验(Accelerating Functions with the C2H Compiler:Scatter-Gather DMA with Checksum)
Nios II C2H编译器是一个将软件功能函数生成硬件加速器的强大工具。
The Nios® II C-to-Hardware Acceleration (C2H) Compiler is a powerful tool that generates hardware accelerators for software functions. This application note uses the C2H Compiler to map C code for a scatter-gather direct memory access (DMA) function to equivalent hardware. The hardware accelerator provides data to an Internet checksum function. Reference files included with the application note provide C code to implement the scatter-gather DMA and the checksum. There are two versions of the checksum code: The first runs as software on the Nios II processor. The second becomes a hardware accelerator, replacing the C code with equivalent logic in the FPGA. The speedup for the hardware version is typically more than two orders of magnitude. The exact speedup depends on the target FPGA.an417.pdf
共1条
1/1 1 跳转至页
【应用笔记】AN417:采用C2H编译器加速功能实现DMA散射收集校验(Accelerating Functions with the C2H Compiler
共1条
1/1 1 跳转至页
回复
我要赚赏金打赏帖 |
|
|---|---|
| 28BYJ-48机械臂实现人脸跟随被打赏¥24元 | |
| 基于RK3506B的片温识读功能的实现被打赏¥25元 | |
| 【瑞萨RA8D1测评】基于FreeRTOS的lvgl移植教程被打赏¥29元 | |
| 电子价签墨水屏开发被打赏¥35元 | |
| 【Ozone】RTT 打印终端使用被打赏¥29元 | |
| BMS保护板绝缘检测功能-不平衡电桥技术绝缘电阻检测设计与实现被打赏¥34元 | |
| 给28BYJ-48三自由度机械臂加一个网页控制台被打赏¥32元 | |
| 用28BYJ-48电机从零搭一台三自由度机械臂被打赏¥33元 | |
| 【英飞凌开发经验】ModusToolbox配置EdgeTalk外设被打赏¥27元 | |
| 基于BQ76952PFBR的BMS保护板热插拔损坏的原因和处理措施被打赏¥32元 | |
我要赚赏金
