共2条
1/1 1 跳转至页
编译uclinux内核,怎么找到commandline?
下面是内核配置菜单:
Linux Kernel v2.4.20-uc0 Configuration
Code maturity level options ---> │ │
│ │ Loadable module support ---> │ │
│ │ Processor type and features ---> │ │
│ │ General setup ---> │ │
│ │ Memory Technology Devices (MTD) ---> │ │
│ │ Parallel port support ---> │ │
│ │ Plug and Play configuration ---> │ │
│ │ Block devices ---> │ │
│ │ Networking options ---> │ │
│ │ Telephony Support ---> │ │
│ │ ATA/IDE/MFM/RLL support ---> │ │
│ │ SCSI support ---> │ │
│ │ I2O device support ---> │ │
│ │ Network device support ---> │ │
│ │ Amateur Radio support ---> │ │
│ │ IrDA (infrared) support ---> │ │
│ │ ISDN subsystem ---> │ │
│ │ Old CD-ROM drivers (not SCSI, not IDE) ---> │ │
│ │ Character devices ---> │ │
│ │ File systems ---> 没有发现kernel hacking----->啊!你用的什么版本?我的是uClinux-Samsung-20020306.tar
│ │ Loadable module support ---> │ │
│ │ Processor type and features ---> │ │
│ │ General setup ---> │ │
│ │ Memory Technology Devices (MTD) ---> │ │
│ │ Parallel port support ---> │ │
│ │ Plug and Play configuration ---> │ │
│ │ Block devices ---> │ │
│ │ Networking options ---> │ │
│ │ Telephony Support ---> │ │
│ │ ATA/IDE/MFM/RLL support ---> │ │
│ │ SCSI support ---> │ │
│ │ I2O device support ---> │ │
│ │ Network device support ---> │ │
│ │ Amateur Radio support ---> │ │
│ │ IrDA (infrared) support ---> │ │
│ │ ISDN subsystem ---> │ │
│ │ Old CD-ROM drivers (not SCSI, not IDE) ---> │ │
│ │ Character devices ---> │ │
│ │ File systems ---> 没有发现kernel hacking----->啊!你用的什么版本?我的是uClinux-Samsung-20020306.tar
共2条
1/1 1 跳转至页
回复
我要赚赏金打赏帖 |
|
|---|---|
| 28BYJ-48机械臂实现人脸跟随被打赏¥24元 | |
| 基于RK3506B的片温识读功能的实现被打赏¥25元 | |
| 【瑞萨RA8D1测评】基于FreeRTOS的lvgl移植教程被打赏¥29元 | |
| 电子价签墨水屏开发被打赏¥35元 | |
| 【Ozone】RTT 打印终端使用被打赏¥29元 | |
| BMS保护板绝缘检测功能-不平衡电桥技术绝缘电阻检测设计与实现被打赏¥34元 | |
| 给28BYJ-48三自由度机械臂加一个网页控制台被打赏¥32元 | |
| 用28BYJ-48电机从零搭一台三自由度机械臂被打赏¥33元 | |
| 【英飞凌开发经验】ModusToolbox配置EdgeTalk外设被打赏¥27元 | |
| 基于BQ76952PFBR的BMS保护板热插拔损坏的原因和处理措施被打赏¥32元 | |
我要赚赏金
