Trace thickness
The thickness of a trace is usually .0014 per ounce of copper.
Our standard material is 1/2 ounce copper that is plated up another 1/2 to 1 ounce during the manufacturing process. The thickness of a trace here would be approximately .0014 to .0021
We also offer 2 ounce material that is also plated up another 1/2 to 1 ounce during the manufacturing process. The thickness here would be approximately .0035 to .0042.
| 有奖活动 | |
|---|---|
| 【有奖活动】分享技术经验，兑换京东卡 | |
| 话不多说，快进群！ | |
| 请大声喊出：我要开发板！ | |
| 【有奖活动】EEPW网站征稿正在进行时，欢迎踊跃投稿啦 | |
| 奖！发布技术笔记，技术评测贴换取您心仪的礼品 | |
| 打赏了！打赏了！打赏了！ | |
| 打赏帖 | |
|---|---|
| 与电子爱好者谈读图四被打赏50分 | |
| 与电子爱好者谈读图二被打赏50分 | |
| 【FRDM-MCXN947评测】Core1适配运行FreeRtos被打赏50分 | |
| 【FRDM-MCXN947评测】双核调试被打赏50分 | |
| 【CPKCORRA8D1B评测】---移植CoreMark被打赏50分 | |
| 【CPKCORRA8D1B评测】---打开硬件定时器被打赏50分 | |
| 【FRDM-MCXA156评测】4、CAN loopback模式测试被打赏50分 | |
| 【CPKcorRA8D1评测】--搭建初始环境被打赏50分 | |
| 【FRDM-MCXA156评测】3、使用FlexIO模拟UART被打赏50分 | |
| 【FRDM-MCXA156评测】2、rt-thread MCXA156 BSP制作被打赏50分 | |
STM32
MCU
通讯及无线技术
物联网技术
电子DIY
板卡试用
基础知识
软件与操作系统
我爱生活
小e食堂