EEPW论坛

在移植s3c4510的BSP时，看到config.h中有类似描述：

#define ROM_BASE_ADRS 0x0 /*0x01000000 base of Flash/EPROM 16 MB */

/* zhangzr: 0x01000000->0x00000000 */
#define ROM_TEXT_ADRS 0x0 /*0x01000000 code start addr in ROM */
#define ROM_SIZE 0x00100000 /* zhangzr: 0x00100000->0x00080000 size of ROM holding VxWorks 512K */

#define ROM_COPY_SIZE ROM_SIZE
#define ROM_SIZE_TOTAL 0x00200000 /* zhangzr: 0x00200000->0x00080000 total size of ROM 2MB */

/* zhangzr: 0x00006000->0x00100000 */
#define RAM_LOW_ADRS 0x00001000 /* VxWorks image entry point */
/* zhangzr: 0x00480000->0x02000000 */
#define RAM_HIGH_ADRS 0x00400000 /* RAM address for ROM boot */

....

请问，这些地址是什么地址？内存remap前的还是remap后的？这些地址由什么因素决定？