问 我在试着调用CCS中tutioral中的hello1工程文件运行时，在装载hello.out文件总是出错，我用原有的.cmd文件，如下：MEMORY
{
    PAGE 0: EPROG:      origin = 0x0000,        len = 0x7c00
            VECT:       origin = 0xff80,        len = 0x80

    PAGE 1: USERREGS:   origin = 0x60,          len = 0x1c
            BIOSREGS:   origin = 0x7c,          len = 0x4
            IDATA:      origin = 0x80,          len = 0x1380
            EDATA:      origin = 0x1400,        len = 0x8000
            EDATA1:     origin = 0x9400,        len = 0x4c00
}

SECTIONS
{
    .vectors: {} > VECT PAGE 0
    .sysregs: {} > BIOSREGS PAGE 1
    .trcinit: {} > EPROG PAGE 0
    .gblinit: {} > EPROG PAGE 0
     frt:     {} > EPROG PAGE 0
    .text:    {} > EPROG PAGE 0
    .cinit:   {} > EPROG PAGE 0
    .pinit:   {} > EPROG PAGE 0
    .sysinit: {} > EPROG PAGE 0
    .bss:     {} > IDATA PAGE 1
    .far:     {} > IDATA PAGE 1
    .const:   {} > IDATA PAGE 1
    .switch:  {} > IDATA PAGE 1
    .sysmem:  {} > IDATA PAGE 1
    .cio:     {} > IDATA PAGE 1
    .MEM$obj: {} > IDATA PAGE 1
    .sysheap: {} > IDATA PAGE 1
    .stack:   {} > IDATA PAGE 1
}
系统提示.vectors;0 of 200 at 0xff80
        .text:0 of 6764 at 0x0
        .cinit: 0 of 396 at 0xd36
        .const: 0 of 30 at 0x392
把PAGE0的VEC初始地址怎么改都是出错，请各位帮忙分析分析是什么原因？ 答 1: 为什么？这是CCS中自带的程序啊，DSP是C542的，没有人用么？ 答 2: 看看你的PMST寄存器IPTR的设置是否和VECT的设置一致看看你的PMST寄存器IPTR的设置是否和VECT的设置一致