主机和目标机通过串口相连，目标机加电以后，在tornado 起target server 时报以下错误：
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 09:45:09 2007
Checking License ...OK
Connecting to target agent... succeeded.
Attaching C++ interface... succeeded.
Warning: No core file. Use -c option if you wish to use one.
Attaching elf OMF reader for PPC CPU family... succeeded.
Error: Cannot get target toolname (symbol error)
请大家帮忙看是什么问题啊？？？
共2条
1/1 1 跳转至页
串口引导vxworks时出问题，请大家帮忙！
2楼
我的config.h文件是这样设置的：
/* Serial port configuration */
#undef CONSOLE_TTY
#define CONSOLE_TTY NONE
#undef WDB_TTY_CHANNEL
#define WDB_TTY_CHANNEL 0
#undef WDB_COMM_TYPE
#define WDB_COMM_TYPE WDB_COMM_SERIAL /* communication through serial port */
#define INCLUDE_TSFS_BOOT
#define INCLUDE_TSFS_BOOT_VIO_CONSOLE
#define WDB_MODE WDB_MODE_EXTERN
#undef WDB_TTY_DEV_NAME
#define WDB_TTY_DEV_NAME "/tyCo/0"
#define INCLUDE_WDB_TSFS
#undef NUM_TTY
#define NUM_TTY N_SIO_CHANNELS
#undef WDB_TTY_BAUD
#define WDB_TTY_BAUD 9600 /*lujf change from 115200*/
tornado里是这样配置的:
起target server时报的错误是：
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:05 2007
Checking License ...OK
Connecting to target agent... succeeded.
Attaching C++ interface... succeeded.
Attaching elf OMF reader for PPC CPU family... succeeded.
Warning: Target checksum: 0x63fe (computed from 0x10000 to 0xd7a40).
Host checksum: 0x4e58 (computed from 0x10a0080 to 0x1167ac0).
Warning: Core file checksums do not match.
Error: rpccore backend client Procedure unavailable
Error: Cannot get target toolname (gopher Error)
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
可是同时shell又好像能起来，，并且好像和板子已经连接上了，因为d命令显示内存正确，而且reboot命令也可以用如下图：
这是什么情况啊，，请大家帮帮忙！！！
/* Serial port configuration */
#undef CONSOLE_TTY
#define CONSOLE_TTY NONE
#undef WDB_TTY_CHANNEL
#define WDB_TTY_CHANNEL 0
#undef WDB_COMM_TYPE
#define WDB_COMM_TYPE WDB_COMM_SERIAL /* communication through serial port */
#define INCLUDE_TSFS_BOOT
#define INCLUDE_TSFS_BOOT_VIO_CONSOLE
#define WDB_MODE WDB_MODE_EXTERN
#undef WDB_TTY_DEV_NAME
#define WDB_TTY_DEV_NAME "/tyCo/0"
#define INCLUDE_WDB_TSFS
#undef NUM_TTY
#define NUM_TTY N_SIO_CHANNELS
#undef WDB_TTY_BAUD
#define WDB_TTY_BAUD 9600 /*lujf change from 115200*/
tornado里是这样配置的:
起target server时报的错误是：
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:05 2007
Checking License ...OK
Connecting to target agent... succeeded.
Attaching C++ interface... succeeded.
Attaching elf OMF reader for PPC CPU family... succeeded.
Warning: Target checksum: 0x63fe (computed from 0x10000 to 0xd7a40).
Host checksum: 0x4e58 (computed from 0x10a0080 to 0x1167ac0).
Warning: Core file checksums do not match.
Error: rpccore backend client Procedure unavailable
Error: Cannot get target toolname (gopher Error)
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
tgtsvr (10.0.4.90@LUJINGFEN): Thu Dec 13 19:17:19 2007
Error: rpccore backend client Procedure unavailable
可是同时shell又好像能起来，，并且好像和板子已经连接上了，因为d命令显示内存正确，而且reboot命令也可以用如下图：
这是什么情况啊，，请大家帮帮忙！！！
共2条
1/1 1 跳转至页
回复
 我要赚赏金打赏帖 |
|
|---|---|
| 一种有效完成脚本程序测试的方法被打赏￥28元 | |
| WorkBuddy搭配SolidCraft给开发板做两件式外壳被打赏￥33元 | |
| 开箱一块k230被打赏￥33元 | |
| 【瑞萨RA8D1测评】RA8D1+lwIP网络验证与TCPOTA的实验记录被打赏￥33元 | |
| 28BYJ-48机械臂实现人脸跟随被打赏￥24元 | |
| 基于RK3506B的片温识读功能的实现被打赏￥25元 | |
| 【瑞萨RA8D1测评】基于FreeRTOS的lvgl移植教程被打赏￥29元 | |
| 电子价签墨水屏开发被打赏￥35元 | |
| 【Ozone】RTT 打印终端使用被打赏￥29元 | |
| BMS保护板绝缘检测功能-不平衡电桥技术绝缘电阻检测设计与实现被打赏￥34元 | |
STM32
MCU
通讯及无线技术
物联网技术
电子DIY
板卡试用
基础知识
软件与操作系统
我爱生活
小e食堂
