【应用手册】Achieving Timing Closure in Basic (PMA Direct) Functional Mode
This application note describes the method to achieve timing closure for designs that
use transceivers in Basic (PMA Direct) mode in Altera’s Stratix® IV GX or
Stratix IV GT FPGAs. It also describes best practices for the Quartus® II software
version 9.1 SP1 and earlier and best practices for the Quartus II software version
9.1 SP2 and later.
This application note describes techniques for resolving timing violations for paths
between the transceiver and the FPGA core only. You must follow general best
practices for timing closure in FPGA designs to resolve any timing violations that
exist in the FPGA core.an580.pdf
共1条
1/1 1 跳转至页
【应用手册】Achieving Timing Closure in Basic (PMA Direct) Functional Mode
共1条
1/1 1 跳转至页
回复
打赏帖 | |
---|---|
【我踩过的那些坑】工作那些年踩过的记忆深刻的坑被打赏10分 | |
【我踩过的那些坑】DRC使用位置错误导致的问题被打赏100分 | |
我踩过的那些坑之混合OTL功放与落地音箱被打赏50分 | |
汽车电子中巡航控制系统的使用被打赏10分 | |
【我踩过的那些坑】工作那些年踩过的记忆深刻的坑被打赏100分 | |
分享汽车电子中巡航控制系统知识被打赏10分 | |
分享安全气囊系统的检修注意事项被打赏10分 | |
分享电子控制安全气囊计算机知识点被打赏10分 | |
【分享开发笔记,赚取电动螺丝刀】【OZONE】使用方法总结被打赏20分 | |
【分享开发笔记,赚取电动螺丝刀】【S32K314】芯片启动流程分析被打赏40分 |