共1条
1/1 1 跳转至页
转发邮件,w4nghui@hotmail.com

你好:
在论坛上知道您是vxwork的高手,我自己做了一块snds100的开发板,想在上面运行vxwork,现在能通过网络bootload,但是在配置TGTSVR 时,与目标板连接
出现以下问题
TGTSVR (wh@sever): Sat Nov 23 22:36:46 2002
Wind River Systems Target Server: NT/Win95 version
Connecting to target agent... succeeded.
Attaching C++ interface... succeeded.
Attaching coff OMF reader for ARM CPU family... succeeded.
Warning: Target checksum: 0x2703 (computed from 0x1000 to 0x8644c).
Host checksum: 0xd703 (computed from 0x69a420 to 0x71f86c).
Warning: Core file checksums do not match.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol ..stabstr from section of type STYP_REG. Ignored.
Warning: Symbol ..stabstr from section of type STYP_REG. Ignored.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol .stabstr from section of type STYP_REG. Ignored.
Warning: Symbol ..stabstr from section of type STYP_REG. Ignored.
您知道是何造成的么?如何解决?
我做的开发板唯一与snds100不同的是sdram我用的是hy的pc133的片子。
关键词: 转发 邮件 w4nghui@hotmail.com
共1条
1/1 1 跳转至页
回复
打赏帖 | |
---|---|
汽车电子中巡航控制系统的使用被打赏10分 | |
【我踩过的那些坑】工作那些年踩过的记忆深刻的坑被打赏100分 | |
分享汽车电子中巡航控制系统知识被打赏10分 | |
分享安全气囊系统的检修注意事项被打赏10分 | |
分享电子控制安全气囊计算机知识点被打赏10分 | |
【分享开发笔记,赚取电动螺丝刀】【OZONE】使用方法总结被打赏20分 | |
【分享开发笔记,赚取电动螺丝刀】【S32K314】芯片启动流程分析被打赏40分 | |
【分享开发笔记,赚取电动螺丝刀】【S32K146】S32DS RTD 驱动环境搭建被打赏12分 | |
【分享开发笔记,赚取电动螺丝刀】【IAR】libc标注库time相关库函数使用被打赏23分 | |
LP‑MSPM0L1306开发版试用结果被打赏10分 |