EEPW论坛

为什么ipv6模块加载后 不能配置地址？？
# insmod ipv6
Using /lib/modules/2.4.18-rmk7-pxa1/kernel/net/ipv6/ipv6.o
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver

# lsmod
Module Size Used by
ipv6 153552 -1
irtty 9008 0 (unused)
irda 163808 0 [irtty]
usb-char 4432 0 (unused)
s3c2410usb_core 12384 0 [usb-char]
ds 9072 1
i82365 14144 1
pcmcia_core 42784 0 [ds i82365]
s3c2410-uda1341 8192 0
soundcore 4368 2 [s3c2410-uda1341]

eth0 Link encap:Ethernet HWaddr 00:00:C0:FF:EE:08
inet addr:59.64.74.106 Bcast:59.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:300 (300.0 b) TX bytes:0 (0.0 b)
Interrupt:37 Base address:0x300

就是没有inet6的地址 ？？？？？？？